Canon EOS Digital Rebel Біла книга - Сторінка 14

Переглянути онлайн або завантажити pdf Біла книга для Програмне забезпечення Canon EOS Digital Rebel. Canon EOS Digital Rebel 29 сторінок. Canon eos 5d mark ii: software guide
Також для Canon EOS Digital Rebel: Посібник з програмного забезпечення (13 сторінок), Інструкція з експлуатації (19 сторінок), Брошура та технічні характеристики (22 сторінок)

disabled by setting the [LCD auto off] menu item to [Disable]. The camera setting dis-

play can also be turned off and on manually with the <DISP> button (formerly INFO) . If

the camera setting display is disabled, it might be difficult to discern whether the cam-

era is turned on or not. A power lamp on the top of the camera is therefore provided to

indicate that it is on.

Other than a face, any object that comes near the dis-

play-off sensor will turn off the camera setting display

temporarily. The camera settings will be displayed again

when the face or object goes away from the camera.

Also note that if you are wearing sunglasses, they could

disperse the IRED light and the display-off sensor might

not be able to detect your face. Additionally, if a fluorescent light inverter is within 1

foot/30 cm of the display-off sensor, a pulse may cause the LCD screen to turn off

automatically.

If auto power off is disabled and the camera is left on, the LCD screen will automatically

turn off after 30 minutes. (Power will not be turned off.) Normally, the camera settings

are displayed whenever the camera is turned on, but to save battery power, you can

have the LCD screen remain OFF even after you turn on the camera's power switch. To

do this, set C.Fn-11 [LCD display when power ON] to [Retain power OFF status]. This set-

ting enables the camera to start up with the same LCD screen status (ON/OFF) as when

the power was turned off.

New User Interface

The new user interface of the Canon Digital Rebel XTi takes advantage of the state-of-

the-art, large, bright and sharp LCD screen to offer a faster, easier and more precise way

to operate the camera. The basic operation procedure of using the main dial, cross

keys, and various buttons to select and set functions is the same as with the Digital

Rebel XT. One difference is the XTi's ability to switch the screen display easily among

the camera settings, menu screen and image playback. This is because camera settings

are now displayed, one might almost say magnified, on the LCD screen instead of on a

separate LCD panel. Other than when the menu screen or image playback is on view,

the camera settings are shown at all times unless the display is turned off. While the

menu screen or image playback is displayed, pressing the shutter button halfway will

bring back the camera settings. With previous cameras, pressing the shutter button

halfway turned off the LCD screen.

Camera setting

III. FEATURE DISCUSSION

Light-receiving

sensor

Image playback

IRED