Canon LV-8300 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Програмне забезпечення Canon LV-8300. Canon LV-8300 25 сторінок. Lv-series multimedia projectors
Також для Canon LV-8300: Посібник з експлуатації (18 сторінок), Початковий посібник (6 сторінок), Брошура та технічні характеристики (4 сторінок)

214

Using the Crojector Group List

2.4.1

Projectors connected to the network can be managed in groups using this software.

Projector groups vary as described below:

Type

Typical group

Status group

User group

2.4.2

Create a new projector group with the following procedures.

Select [New] from the [Group] menu.

[Add new projector group] window will display.

Typical group that automatically classifies managed projectors

depending on its status. Typical group includes "All projectors",

"Power on", "Power off", "Disconnect", "Warning", and "Replacing

the lamp". You cannot change or delete the settings of this Typical

group.

For projectors classified into "Warning" and "Replacing the lamp"

types, confirm its status and take appropriate measures. For

procedures on handling malfunctions and replacing lamps, see the

instruction manual that came with the projector.

Group that automatically classifies all managed projectors

depending on its status. Status groups can be created by specifying

the location or status. You can change or delete the parameters of

this Status group.

(e.g. "Clean Filter Group", "Main Building First Floor", etc.)

Group that classifies all managed projectors. It will be a User group

if only the name of group is registered and the projector's status is

not specified. You can change the name or delete this User group.

User groups are shown as a sub-menu of either [Move] or [Copy]

from the [Projector] menu, and any projectors can be added to

these groups.

(e.g. "Sales Management Group", "Administration Management

Group", etc.)

CHAPTER 2 • Routine Operation

Description