Asus A7V-VE Посібник із швидкого старту - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Материнська плата Asus A7V-VE. Asus A7V-VE 21 сторінка. Athlon / duron microatx motherboard
Друкувати сторінку2. HARDWARE SETUP
2.6 Central Processing Unit (CPU)
The motherboard provides a Socket 462 or Socket A for CPU installation. A fan and
heatsink should be attached to the CPU to prevent overheating. Purchase and install
a fan and heatsink before turning on the system.
A7V-VE
A7V-VE Socket 462
1. Locate the Socket 462 and open it by pulling
the lever gently sideways away from the socket.
Then lift the lever upwards. The socket lever
must be fully opened (90 to 100 degrees).
2. Insert the CPU with the correct orientation. The
notched corner of the CPU must be oriented
toward the inner corner of the socket base
nearest to the lever hinge.
CAUTION!
The CPU fits in one orientation
and should drop easily into place. Do not force
the CPU into the socket to avoid bending the
pins. If the CPU does not fit, check its
alignment and look for bent pins.
3. Once completely inserted, press the CPU firmly
and close the socket lever until it snaps into its locked position.
4. Place the CPU fan and heatsink on the CPU. The heatsink should entirely cover
the CPU. Carefully attach the heatsink locking brace to the plastic clips on the
socket base. With the added weight of the CPU fan and heatsink locking brace,
no extra force is required to keep the CPU in place.
CAUTION!
Take care not to scrape the motherboard surface when mounting a
clamp-style processor fan, or else damage may occur. Ensure that exposed CPU
capacitors do not touch the heatsink, or else damage may occur!
NOTE!
Do not forget to set the correct Bus Frequency and Multiple (available
only on unlocked processors) to avoid start-up problems.
AMD™ CPU
CPU NOTCH
A7V-VE User's Manual
CPU NOTCH
TO INNER
CORNER
LEVER
LOCK
9