AL Guardian G9 RX Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільна електроніка AL Guardian G9 RX. AL Guardian G9 RX 20 сторінок.

Attach the unit using double-sided adhesive tape and a mounting bracket to a position that offers

a clear front (back) view. The mounting bracket can be bent as needed. Make sure the sensor is

installed firmly in order to absorb vibrations that occur while driving, especially if mounted on a

motorbike. For maximum grip use an adhesive tape in combination with the mounting bracket.

If installing sensors behind flat surfaces (plastic bumpers, dens grills) it will be necessary to drill

holes through which the sensor will have unobstructed view of the road. Two circles on the

sketch of the sensor lens represent area

where receiving and emitting diodes are

positioned. These circles must be clear

of obstruction while the rest of the lens

can be covered if needed. Obstructing

surface should not be more than 1 cm

away from the sensor lens, or larger

holes should be drilled to maintain

angle protection.

Make sure the sensor is levelled (use a level to check).

5 AL G9 User Guide