AL Guardian G9 RX Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільна електроніка AL Guardian G9 RX. AL Guardian G9 RX 20 сторінок.

4.1.2 Silent power-up (DEFAULT: OFF)

During activation, only red and green indicator lights will flash without sounds. Use the following sequence

to activate/deactivate this feature:

Press and hold the key button while counting the flashing green light.

Release the key button after the fifth (5) flash.

AL G9 will reprogram and this will be signalled by red and green flashing lights and speaker tones.

4.1.3 Laser interference defense (LID) adjustment (DEFAULT: 4 SEC)

AL G9 possesses an advanced program code for detecting and deflecting possible interference signals

from other sources of laser emissions on the 905 nm frequency. When a constant interference is detected

and recognized as an aggressive disturbance for the parking sensor operation, AL G9 will try to ensure

maintaining its reliable performance. During this time the user will be warned by a four second tone from

the speaker and a red flashing light that a parking sensor operation has become unreliable. If the parking

sensor operation is not recovered within 4 seconds and the interference continues the unit will

automatically reset.

You can choose between 4 seconds and 8 seconds duration of eventual interference detection and

deflection. This mode can be programmed with the following sequence on the key button:

Press and hold the key button while counting the flashing green light.

Release the key button after the eighth (8) flash.

AL G9 will reprogram accompanied by red and green flashing lights and speaker tones. A short

tone coming from the speaker during reprogramming indicates the 4 sec mode being selected while the

long tone indicates the 8 sec mode. The limit duration settings alternate so please repeat the sequence to

return to the previous state.

4.1.4 LED Dark mode (DEFAULT: OFF)

To prevent the green light from flashing every second during normal operation, you can activate the LED

Dark mode. The green light will stop flashing after the warm-up period (60 seconds after the power-up) if

this mode is activated.

AL G9 User Guide