BATTERY LINK MCU025 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Зарядний пристрій BATTERY LINK MCU025. BATTERY LINK MCU025 9 сторінок.
Також для BATTERY LINK MCU025: Посібник (8 сторінок)

Друкувати сторінку

Fault Finding

» Charger won't indicate

charging.

» No spark when charging

clamps or terminals

touch together.

» Multimeter will not

provide a reading

between charging

clamps prior to

connection to battery.

» Battery won't fully

charge or hold charge.

Specifications

Min start up Voltage:

Battery capacity:

Input voltage:

Charge program:

Body construction:

Protection:

Battery types:

» • Charger not connected to battery.

• Check terminal connection.

• Battery is not 12V.

» Charger features an inbuilt safety device to prevent sparking if

clamps or terminals accidentally touch together.

» A multimeter voltage reading will only be provided when the charger

is connected to the battery.

» Batteries that are over 3 years old; severely discharged (or previously

been severely discharged) ; not regularly recharged; over- heated;

low in electrolyte ; undercharged: overcharged or sulphated may not

accept or hold a charge. A good automotive store or battery outlet

often offer a free or low cost in store service to check condition of

battery. Your battery may require replacement.

up to 40Ah

185 - 255V / 50 Hz

3 stage (Boost/Absorption/Float)

Soft start

ABS

On-board temperature controls

Over temperature protection

Short circuit protection

Reverse polarity protection

Gel,Calcium, Sealed Lead Acid (SLA), Wet.