Al Nasser Group Noortek FLD023 Посібник з технічного обслуговування та встановлення - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з технічного обслуговування та встановлення для Прожектор Al Nasser Group Noortek FLD023. Al Nasser Group Noortek FLD023 4 сторінки.
Друкувати сторінкуLED FLOOD LIGHT- FLD02X IP66
This electrical product MUST be recycled
in accordance with WEEE Directive.
Installation Instructions :
01. Product should be handled by care with person has experience in lighting unit
installation.
02. Only the proper working voltage & frequency (as indicated in product sticker & data
sheets) Should be applied.
03. Handle with care product sensitive components such has aluminum louver & reflectors.
04. Be sure that product is not connected to supply during any installation activities.
05. Test the product after finalizing installation by connecting to proper supply & confirm it is
Working well. If not kindly check the installation instruction again.
06. Re tight all screws & brackets again after installating light source to keep the IP rating.
Maintenance Instructions :
01. Apply maintenance activities in case of lamp replace or periodic maintenance programs.
02. Remove cover or louvers with care using soft gloves & keep in clean place till re install
again after maintains activities.
03. Change light source with same specified type.
04. Clean the inner part using soft cloth & not allowed to use any chemicals, that can affect
the Painting & decrease life time.
05. Re tight all screws & brackets again after installating light source to keep the IP rating.
Instructions For How to Clean Debris if Accidental Broken :
01. Do not use a vacuum cleaner to clean up the breakage. This will spread the small
broken parts and dust throughout the area and could potentially contaminate the vacuum.
02. Keep people and pets away from the breakage area until the cleanup is complete
03. Ventilate the area by opening windows, and leave the area for 15 minutes before
returning to begin the cleanup. Mercury vapor levels will be lower by then.
04. For maximum protection and if you have them, wear rubber gloves to protect your hands
from the sharp parts
05. Carefully remove the larger pieces and place them in a secure closed container,
preferably a glass container with a metal screw top lid and seal like a canning jar.
06. Next, begin collecting the smaller pieces and dust. You can use two stiff pieces of paper
such as index cards or playing cards to scoop up pieces.
07. Put the area with the sticky side of duct tape, packing tape or masking tape to pick up
fine particles. Wipe the area with a wet wipe or damp paper towel to pick up even finer
particles.
08. Put all waste and materials into the glass container, including all material used in the
cleanup that may have been contaminated with mercury.
09. Remove the container with the breakage and cleanup materials from yourplace. This is
particularly important if you do not have a glass container.
10. Continue ventilating the place for several hours.
11. Wash your hands and face.
Attention :
01. Please use it in strict accordance with the instructions.
02. Do not replace parts and rebuild lamps Note: Please be sure to cut off the power before
installation to prevent electric shock!
03. In order to ensure the normal operation of the product, please use the power supply with
the voltage within the indicated range.
04. Please follow the correct installation steps to install this product.
05. Disconnect the power supply when installing or removing the product to avoid the risk of
electric shock.
06. Do not look directly at the LED light source for a long time. High-intensity light sources
may cause eye damage.
07.When you find the following problems, please ask a qualified electrician for repair
service. Do not disassemble it at will:
a) When the product produces an odorous gas, makes an abnormal sound, or unusually
flickers.
08.Working Environment：-40 - +50
Working Humidity：30% - 85%
Storage Humidity：10% - 90%
09.Unpacking inspection :
a. Open the package and check the product carefully.
b. If you find any damage to the product, please keep the package and contact our company
in time.
Please do not try to use a damaged product.
Class 1 -
This product should be Earthed.
Storage Temperature: -30 - 65
Salah Ad Din Al Ayyubi Rd. Al Malaz
www.alnassergroup.com
IK08
Protected against direct sprays of
water up to 15 ° from the vertical.
08 ik_08
.(20. ﯾﺟب ﺗطﺑﯾق اﻟﺟﮭد اﻟﻣﻘﻧن واﻟﺗردد اﻟﻣﻧﺎﺳب ﻓﻘط )ﻛﻣﺎ ھو ﻣوﺿﺢ ﻓﻲ ﻣﻠﺻق اﻟﻣﻧﺗﺞ وأوراق اﻟﺑﯾﺎﻧﺎت اﻟﻔﻧﯾﺔ
50.إﺧﺗﺑ ـ ـر اﻟﻣﻧﺗ ـ ـﺞ ﺑﻌ ـ ـد اﻻﻧﺗﮭ ـ ـﺎء ﻣ ـ ـن اﻟﺗﺛﺑﯾ ـ ـت ﻋ ـ ـن طرﯾ ـ ـق اﻟﺗوﺻﯾ ـ ـل ﺑﺎﻟﻣﺻ ـ ـدر اﻟﻣﻧﺎﺳ ـ ـب واﻟﺗﺄﻛ ـ ـد ﻣ ـ ـن أﻧ ـ ـﮫ ﯾﻌﻣ ـ ـل ﺑﺷ ـ ـﻛل ﺟﯾ ـ ـد. إن
.60. أﻋد رﺑط ﺟﻣﯾﻊ اﻟﺑراﻏﻲ وﺣواﻣل اﻟﺗﺛﺑﯾت ﻣرة أﺧرى ﺑﻌد ﺗﺛﺑﯾت ﻣﺻدر اﻟﺿوء ﻟﻠﺣﻔﺎظ ﻋﻠﻰ درﺟﺔ اﻟﺣﻣﺎﯾﺔ
20. ﻗ ـ ـم ﺑﻔ ـ ـك اﻟﻐط ـ ـﺎء أو اﻟﻌﺎﻛ ـ ـس ﺑﻌﻧﺎﯾ ـ ـﺔ ﺑﺎﺳ ـ ـﺗﺧدام اﻟﻘﻔ ـ ـﺎزات اﻟﻧﺎﻋﻣ ـ ـﺔ واﺣﻔظ ـ ـﮫ ﻓ ـ ـﻲ ﻣ ـ ـﻛﺎن ﻧظﯾ ـ ـف ﺣﺗ ـ ـﻰ ﺗﻌﯾ ـ ـد اﻟﺗﺛﺑﯾ ـ ـت ﻣ ـ ـرة أﺧ ـ ـرى
40. ﻗ ـ ـم ﺑﺗﻧظﯾ ـ ـف اﻟﺟ ـ ـزء اﻟداﺧﻠ ـ ـﻲ ﺑﺈﺳ ـ ـﺗﺧدام ﻗطﻌ ـ ـﺔ ﻗﻣ ـ ـﺎش ﻧﺎﻋﻣ ـ ـﺔ وﻋ ـ ـدم اﻟﺳ ـ ـﻣﺎح ﺑﺎإﺳ ـ ـﺗﺧدام أى ﻣ ـ ـواد ﻛﯾﻣﯾﺎﺋﯾ ـ ـﺔ ، واﻟﺗ ـ ـﻲ ﯾﻣﻛ ـ ـن أن
.50. أﻋد رﺑط ﺟﻣﯾﻊ اﻟﺑراﻏﻲ وﺣواﻣل اﻟﺗﺛﺑﯾت ﻣرة أﺧرى ﺑﻌد ﺗﺛﺑﯾت ﻣﺻدر اﻟﺿوء ﻟﻠﺣﻔﺎظ ﻋﻠﻰ درﺟﺔ اﻟﺣﻣﺎﯾﺔ
10. ﻻ ﺗﺳ ـ ـﺗﺧدم ﻣﻛﻧﺳ ـ ـﺔ ﻛﮭرﺑﺎﺋﯾ ـ ـﺔ ﻟﺗﻧظﯾ ـ ـف اﻟﻛﺳ ـ ـر. ھ ـ ـذا ﺳ ـ ـوف ﯾ ـ ـؤدى ﻷﻧﺗﺷ ـ ـﺎر اﻷﺟ ـ ـزاء اﻟﺻﻐﯾ ـ ـرة اﻟﻣﻛﺳ ـ ـورة واﻟﻐﺑ ـ ـﺎر ﻓ ـ ـﻲ ﺟﻣﯾ ـ ـﻊ
30. ﻗ ـ ـم ﺑﺗﮭوﯾ ـ ـﺔ اﻟﻣﻧطﻘ ـ ـﺔ ﻋ ـ ـن طرﯾ ـ ـق ﻓﺗ ـ ـﺢ اﻟﻧواﻓ ـ ـذ ، واﺗ ـ ـرك اﻟﻣﻧطﻘ ـ ـﺔ ﻟﻣ ـ ـدة 51 دﻗﯾﻘ ـ ـﺔ ﻗﺑل اﻟﻌ ـ ـودة ﻟﺑدء اﻟﺗﻧظﯾف. ﺳ ـ ـﺗﻛون ﻣﺳ ـ ـﺗوﯾﺎت
50. ﻗ ـ ـم ﺑﺈزاﻟ ـ ـﺔ اﻷﺟ ـ ـزاء اﻟﻛﺑﯾ ـ ـرة ﺑﻌﻧﺎﯾ ـ ـﺔ ووﺿﻌﮭ ـ ـﺎ ﻓ ـ ـﻲ ﺣﺎوﯾ ـ ـﺔ ﻣﻐﻠﻘ ـ ـﺔ آﻣﻧ ـ ـﺔ ، وﯾﻔﺿ ـ ـل أن ﺗﻛ ـ ـون ﺣﺎوﯾ ـ ـﺔ زﺟﺎﺟﯾ ـ ـﺔ ﻣ ـ ـﻊ ﻏط ـ ـﺎء ﻋﻠ ـ ـوي
60. ﺑﻌ ـ ـد ذﻟ ـ ـك ، اﺑ ـ ـدأ ﻓ ـ ـﻲ ﺟﻣ ـ ـﻊ اﻟﻘط ـ ـﻊ اﻟﺻﻐﯾ ـ ـرة واﻟﻐﺑ ـ ـﺎر. ﯾﻣﻛﻧ ـ ـك اﺳ ـ ـﺗﺧدام ﻗطﻌﺗﯾ ـ ـن ﻗﺎﺳ ـ ـﯾﺗﯾن ﻣ ـ ـن اﻟ ـ ـورق ﻣﺛ ـ ـل ﺑطﺎﻗ ـ ـﺎت اﻟﻔﮭرﺳ ـ ـﺔ
70. ﺿ ـ ـﻊ اﻟﻣﻧطﻘ ـ ـﺔ ﻣ ـ ـن اﻟﺟﺎﻧ ـ ـب اﻟﻠ ـ ـزج ﻣ ـ ـن ﺷ ـ ـرﯾط ﻻﺻ ـ ـق ﻻﻟﺗﻘ ـ ـﺎط اﻟﺟزﯾﺋ ـ ـﺎت اﻟدﻗﯾﻘ ـ ـﺔ. اﻣﺳ ـ ـﺢ اﻟﻣﻧطﻘ ـ ـﺔ ﺑﻣﻧﺷ ـ ـﻔﺔ ﻣﺑﻠﻠ ـ ـﺔ أو ﻣﻧﺷ ـ ـﻔﺔ
80. ﺿ ـ ـﻊ ﻛل اﻟﻧﻔﺎﯾ ـ ـﺎت واﻟﻣ ـ ـواد ﻓ ـ ـﻲ اﻟﺣﺎوﯾ ـ ـﺔ اﻟزﺟﺎﺟﯾ ـ ـﺔ ، ﺑﻣ ـ ـﺎ ﻓ ـ ـﻲ ذﻟ ـ ـك ﺟﻣﯾ ـ ـﻊ اﻟﻣ ـ ـواد اﻟﻣﺳ ـ ـﺗﺧدﻣﺔ ﻓ ـ ـﻲ اﻟﺗﻧظﯾ ـ ـف واﻟﺗ ـ ـﻲ ﻗ ـ ـد ﺗﻛ ـ ـون
.90. ﻗم ﺑﺈزاﻟﺔ اﻟﺣﺎوﯾﺔ ﻣﻊ ﻣواد اﻟﻛﺳر واﻟﺗﻧظﯾف ﻣن اﻟﻣﻛﺎن. ھذا ﻣﮭم ﺑﺷﻛل ﺧﺎص إذا ﻟم ﯾﻛن ﻟدﯾك وﻋﺎء زﺟﺎﺟﻲ
.30. ﻣن أﺟل ﺿﻣﺎن اﻟﺗﺷﻐﯾل اﻟطﺑﯾﻌﻲ ﻟﻠﻣﻧﺗﺞ ، ﯾرﺟﻰ اﺳﺗﺧدام ﻣزود اﻟطﺎﻗﺔ ﻣﻊ اﻟﺟﮭد داﺧل اﻟﻧطﺎق اﻟﻣﺣدد
. ﻟﻔﺗرة طوﯾﻠﺔ. ﻣﺻﺎدر اﻟﺿوء ﻋﺎﻟﯾﺔ اﻟﻛﺛﺎﻓﺔ ﻗد ﺗﺗﺳﺑب ﻓﻲ ﺗﻠف اﻟﻌﯾنLED 60. ﻻ ﺗﻧظر ﻣﺑﺎﺷرة إﻟﻰ ﻣﺻدر ﺿوء
درﺟﺔ ﺣرارة اﻟﺗﺧزﯾن : 03- - 56 درﺟﺔ ﻣﺋوﯾﺔ
Al Nasser Group
Tel: +966 11 4777700
وﺣﺪة إﻧﺎرة ﻣﻮﺟﻬﺔ ﺧﺎرﺟﻴﺔ
Protected against solid objects that
are bigger than 1mm and water
splashing from all directions.
.10. ﯾﺟب اﻟﺗﻌﺎﻣل ﻣﻊ اﻟﻣﻧﺗﺞ ﺑﻌﻧﺎﯾﺔ ﻓﺎﺋﻘﺔ ﻣﻊ ﺧﺑرة ﻓﻲ ﺗرﻛﯾب وﺣدات اﻹﺿﺎءة
.30. ﺗﻌﺎﻣل ﺑﻌﻧﺎﯾﺔ ﻣﻊ اﻟﻣﻛوﻧﺎت اﻟﺣﺳﺎﺳﺔ ﻟﻣﻧﺗﺟﺎت اﻟﻌﻧﺎﯾﺔ ﻣﺛل اﻷﻟوﻣوﻧﯾوم واﻟﻌﺎﻛﺳﺎت
.40. ﺗﺄﻛد ﻣن أن اﻟﻣﻧﺗﺞ ﻏﯾر ﻣﺗﺻل ﺑﻣﺻدر اﻟﻛﮭرﺑﺎء أﺛﻧﺎء أى أﻧﺷطﺔ ﺗﺛﺑﯾت
.ﻟم ﯾﻌﻣل ﺟﯾد ا ً ﯾرﺟﻰ ﻣراﺟﻌﺔ ﺗﻌﻠﯾﻣﺎت اﻟﺗﺛﺑﯾت ﻣرة أﺧرى
.10. ﺗطﺑﯾق أﻧﺷطﺔ اﻟﺻﯾﺎﻧﺔ ﻓﻲ ﺣﺎﻟﺔ اﺳﺗﺑدال اﻟﻣﺻﺑﺎح أو ﺑراﻣﺞ اﻟﺻﯾﺎﻧﺔ اﻟدورﯾﺔ
.30. ﻗم ﺑﺗﻐﯾﯾر ﻣﺻدر اﻟﺿوء ﺑﻧﻔس اﻟﻧوع اﻟﻣﺣدد
.ﺗؤﺛر ﻋﻠﻰ اﻟطﻼء وﺗﻘﻠﯾل اﻟﻌﻣر اﻹﻓﺗراﺿﻰ ﻟﻠﻣﻧﺗﺞ
: ﺗﻌﻠﯾﻣﺎت ﻛﯾﻔﯾﺔ ﺗﻧظﯾف اﻟﺣطﺎم ﻓﻲ ﺣﺎﻟﺔ ﻛﺳر ﻋرﺿﻰ
.20. اﺗرك اﻟﻧﺎس واﻟﺣﯾواﻧﺎت اﻷﻟﯾﻔﺔ ﺑﻌﯾ د ً ا ﻋن ﻣﻧطﻘﺔ اﻟﻛﺳر ﺣﺗﻰ ﯾﻛﺗﻣل اﻟﺗﻧظﯾف
.40. ﻷﻗﺻﻰ ﻗدر ﻣن اﻟﺣﻣﺎﯾﺔ ، إرﺗدى ﻗﻔﺎزات ﻣطﺎطﯾﺔ ﻟﺣﻣﺎﯾﺔ ﯾدﯾك ﻣن اﻷﺟزاء اﻟﺣﺎد
.10. ﯾرﺟﻰ اﺳﺗﺧداﻣﮫ ﺑﻣﺎ ﯾﺗﻔق ﺑدﻗﺔ ﻣﻊ اﻟﺗﻌﻠﯾﻣﺎت
20. ﻻ ﺗﺳﺗﺑدل اﻷﺟزاء وإﻋﺎدة ﺑﻧﺎء اﻟﻣﺻﺎﺑﯾﺢ
!ﻣﻼﺣظﺔ: ﯾرﺟﻰ اﻟﺗﺄﻛد ﻣن ﻗطﻊ اﻟﺗﯾﺎر اﻟﻛﮭرﺑﺎﺋﻲ ﻗﺑل اﻟﺗﺛﺑﯾت ﻟﻣﻧﻊ اﻟﺻدﻣﺔ اﻟﻛﮭرﺑﺎﺋﯾﺔ
.40. ﯾرﺟﻰ اﺗﺑﺎع ﺧطوات اﻟﺗﺛﺑﯾت اﻟﺻﺣﯾﺣﺔ ﻟﺗﺛﺑﯾت ھذا اﻟﻣﻧﺗﺞ
.50.اﻓﺻل ﻣﺻدر اﻟطﺎﻗﺔ ﻋﻧد ﺗﺛﺑﯾت اﻟﻣﻧﺗﺞ أو إزاﻟﺗﮫ ﻟﺗﺟﻧب ﺧطر ﺣدوث ﺻدﻣﺔ ﻛﮭرﺑﺎﺋﯾﺔ
: 70.ﻋﻧدﻣﺎ ﺗﺟد اﻟﻣﺷﺎﻛل اﻟﺗﺎﻟﯾﺔ ، ﯾرﺟﻰ ﺳؤال ﻛﮭرﺑﺎﺋﻲ ﻣؤھل ﻟﺧدﻣﺔ اﻹﺻﻼح. ﻻ ﺗﻘم ﺑﺗﻔﻛﯾﻛﮭﺎ
.أ( ﻋﻧدﻣﺎ ﯾﻧﺗﺞ اﻟﻣﻧﺗﺞ ﻏﺎز ً ا ذو راﺋﺣﺔ ، ﯾﺻدر ﺻو ﺗ ً ﺎ ﻏﯾر طﺑﯾﻌﻲ ، أو وﻣﯾ ﺿ ًﺎ ﻏﯾر ﻋﺎدي
80.ﺑﯾﺋﺔ اﻟﻌﻣل : 04- - + 05 درﺟﺔ ﻣﺋوﯾﺔ
90٪ - 10٪ ： رطوﺑﺔ اﻟﺗﺧزﯾن
.ب. إذا وﺟدت أي ﻛﺳر ﺑﺎﻟﻣﻧﺗﺞ ، ﯾرﺟﻰ اﻟﺣﻔﺎظ ﻋﻠﻰ اﻟﻌﺑوة واﻻﺗﺻﺎل ﺑﺷرﻛﺗﻧﺎ ﻓﻲ اﻟوﻗت اﻟﻣﻧﺎﺳب
IP66
: ﺗﻌﻠﯾﻣﺎت اﻟﺗرﻛﯾب
: ﺗﻌﻠﯾﻣﺎت اﻟﺻﯾﺎﻧﺔ
.ﺑﻌد أﻧﺷطﺔ اﻟﺻﯾﺎﻧﺔ
.أﻧﺣﺎء اﻟﻣﻧطﻘﺔ وﯾﻣﻛن أن ﯾﻠوث اﻟﻔراغ
.ﺑﺧﺎر اﻟزﺋﺑق أﻗل ﺑﺣﻠول ذﻟك اﻟوﻗت
.ﻟوﻟﺑﻲ ﻣﻌدﻧﻲ وﻏطﺎء ﻣﺛل ﺟرة اﻟﺗﻌﻠﯾب
.أو أوراق اﻟﻠﻌب ﻟﺗﺟﻣﯾﻊ اﻟﻘطﻊ
.ورﻗﯾﺔ رطﺑﺔ ﻻﻟﺗﻘﺎط ﺟزﯾﺋﺎت أﻛﺛر دﻗﺔ
.ﻣﻠوﺛﺔ ﺑﺎﻟزﺋﺑق
.01. اﺳﺗﻣر ﻓﻲ ﺗﮭوﯾﺔ اﻟﻣﻛﺎن ﻟﻌدة ﺳﺎﻋﺎت
.11. اﻏﺳل ﯾدﯾك ووﺟﮭك
: إﻧﺗﺑﮫ
85٪ - 30٪ ٪رطوﺑﺔ اﻟﻌﻣل
: 90.ﻓﺣص ﻋﺑوة اﻟﺗﻐﻠﯾف
.أ. اﻓﺗﺢ اﻟﻌﺑوة وﺗﺣﻘق ﻣن اﻟﻣﻧﺗﺞ ﺑﻌﻧﺎﯾﺔ
.ﻣن ﻓﺿﻠك ﻻ ﺗﺣﺎول اﺳﺗﺧدام اﻟﻣﻧﺗﺞ اﻟﺗﺎﻟف
D
W