Amprobe VPC-10 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Amprobe VPC-10. Amprobe VPC-10 16 сторінок. Voltage & continuity tester
Також для Amprobe VPC-10: Інструкція з експлуатації (2 сторінок)
Друкувати сторінкуInput Impedance: 1MW
Temperature: Operating: -10°C to +50°C (14°F to 122°F),
Altitude: Operating: 3000m; Storage: 10,000m
Relative Humidity: 90%(0°C-30°C); 75%(30°C-40°C);
45%(40°C-50°C)
Battery Type and Life: AA (2); 350 hours with NEDA 15F
or IEC R6
Safety: Complies with EN61010-1 for use in overvoltage
CAT III environments
EMC Regulations: EN50081-1, EN50082-1
MAINTENANCE AND REPAIR
If there appears to be a malfunction during the
operation of the meter, the following steps should be
performed in order to isolate the cause of the problem.
1. Check the battery. Replace the battery
immediately when the symbol "�" appears on
the LCD.
2. Review the operating instructions for possible
mistakes in operating procedure.
Except for the replacement of the battery, repair of the
meter should be performed only by a Factory Authorized
Service Center or by other qualified instrument service
personnel.
The front panel and case can be cleaned with a mild
solution of detergent and water.
Apply sparingly with a soft cloth and allow to dry
completely before using. Do not use aromatic
hydrocarbons, Gasoline or chlorinated solvents for
cleaning.
Storage: -30°C to +60°C (-22°F to 140°F)
6