Amprobe DM78C Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Мультиметр Amprobe DM78C. Amprobe DM78C 15 сторінок. Digital pocket multimeter

oPERAtIoN

Beeper

Note: The beeper sounds for function change,

Range Lock, Range Hold, and continuity.

Ranging: The meter defaults to autoranging

when turned on, and selects the range

automatically. For Manual Ranging: press

"Range lock" Button to hold selected range (

on the display). Pressing "Range lock" again

steps to next range. hold button for 2 sec. to

return to Autorange mode.

Data Hold: Press the "Data hold" Button to

turn on ("h" displayed) and off the function.

last reading is held on the display. Press "h"

button again to release and display present

readings.

Selector Switch: when the Selector Switch is

in the Ω �� position, press the "Function

Select" Button for resistance (Ω) continuity

test (Ω and �), or diode test (�). when the

Selector Switch is in VolT position, press the

"Function Select" Button to select AC voltage

or DC voltage.

Auto Power off (APo): Meter will turn off after

0 minutes of non-use. APo can be disabled by

pressing and holding the (RAngE) button while

moving the function switch from off to desired

function.