Bosch WAE16166IL Series Посібник з експлуатації та інструкція з монтажу - Сторінка 25

Переглянути онлайн або завантажити pdf Посібник з експлуатації та інструкція з монтажу для Пральна машина Bosch WAE16166IL Series. Bosch WAE16166IL Series 36 сторінок.

Друкувати сторінку

Faults

The spin result is not sat-

isfactory.

Laundry is wet/too damp.

The spin cycle runs sev-

eral times.

The programme is taking

longer than usual.

Residual water in the care

product dispenser.

Odours in the washing

machine.

Wash indicator light

flashes. Foam may also

be leaking from the deter-

gent drawer.

Loud noises, vibrations

and machine "move-

ment" during the spin

cycle.

Noises during spin and

drain cycles.

The indicator lights do not

work while the appliance

is running.

There is detergent resi-

due on the laundry.

If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required:

Turn the programme selector to Off. The appliance is switched off.

■

Unplug the mains plug from the socket.

■

Turn off the tap and call the after-sales service.

■

Cause/Remedy

Not a fault – unbalanced load detection system has stopped the spin cycle;

■

washing unevenly distributed.

Distribute small and large items of washing in the drum.

p Easy-Iron selected?

■

Is the selected speed too low?

■

Not a fault – the unbalanced load detection system is adjusting an imbalance.

Not a fault – the unbalanced load detection system is adjusting an imbal-

■

ance by repeatedly distributing the laundry.

Not a fault; the foam detection system is active – a rinse cycle has been

■

switched on.

Not a fault – the effect of the care product is not affected.

■

Clean the insert if necessary

■

Run the Cottons 90 °C programme without laundry. Use standard detergent

for this.

Have you used too much detergent?

Mix one tablespoon of fabric softener with 1/2 litre of water and pour into com-

partment II (not for outdoor fabrics or those made with down).

Use less detergent in the next washing cycle.

Are the appliance's feet fixed? Secure the appliance's feet.

■

Have the transport locks been removed? Remove the transport locks.

■

Clean the drain pump

Has there been a power failure?

■

Have the fuses blown? Reset/replace the fuses.

■

If the fault occurs repeatedly, call the after-sales service.

■

Some phosphate-free detergents contain water-insoluble residue.

■

Select Rinse/Spin or brush the laundry after washing.

■

Faults and what to do about them.