Alen A375 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Очищувач повітря Alen A375. Alen A375 7 сторінок. Hepa
Також для Alen A375: Посібник користувача (13 сторінок), Посібник користувача (14 сторінок)

Друкувати сторінку

1. Replacing the Filter

KNoW yoUR AiR PURifiER

Control Panel

CLEAN

0 56

INDICATOR

Filter Replacement

TIMER ON/OFF

Indicator

SPEED

Fan Speed Button

ON / OFF

UV Button

on/off button – Press the On/Off button to turn the air purifier on, press

again to turn the air purifier off. The air purifier will run continuously unless

it is turned off manually or the Timer function is utilized.

filter Replacement indicator – The Clean Indicator light will come on af-

ter 4,000 hours of operation (about 6 months if the unit is run continuous-

ly). When the filter is replaced, you can reset the Clean Indicator light by

pressing the Timer button for 5-10 seconds while the unit is running.

fan Speed – The Speed button is used to adjust the fan speed of the air

purifier. The fan speed options are 1, 2, 3, 4, 1auto. Each time the Speed

button is pressed, the fan speed will increase. Once the highest fan

speed is reached, the cycle will repeat.

UV button – The UV button turns the UV lamp(s) on and off. Press the UV

button to turn the UV lamp(s) on, press again to turn off. The UV lamps

are used to kill bacteria and virus particles in the air. The UV lamps also

interact with a photocatalyst filter inside the air purifier to decompose

odors in the air such as formaldehyde, alcohol, and ammonia.

ionizer – Turn the Ionizer on by pressing the Ion button while the air puri-

fier is running, press again to turn the Ionizer off. The Ionizer is used to

assist with the removal of dust, pollen, pet dander, and mold spores by

SMELL

Remote Control

Sensor

DUST

TIMER

TImer Button

IONIZER

Ionizer Button

On/Off Button

releasing negative ions into the air. The negative ions attract particles

and make them "stick" together. The particles are then larger and more

easily caught by the HEPA filter.

Timer – The Timer should be used when you want the unit to turn off au-

tomatically. While the air purifier is turned on, press the Timer button to

set the desired run time (hours). The air purifier will automatically turn off

once the timer has counted down to zero. The Timer button is also used

to reset the "Clean Indicator" light.

LCd display

fan Speed – Displays the current fan speed.

odor Sensor – Displays the current level of odor being sensed. The lowest

level is shown by a single dash. As the level increases the dash will get

larger from right to left.

dust Sensor – Displays the current level of dust being sensed. The lowest

level is shown by a single dash. As the level increases the dash will get

larger from left to right.

Timer – Displays the amount of time remaining on the timer, before the

unit will shut off.