Electrolux 506029 Технічна специфікація
Переглянути онлайн або завантажити pdf Технічна специфікація для Посудомийна машина Electrolux 506029. Electrolux 506029 2 сторінки. Warewashing hot water sanitizing pot and pan washer – 34.50′′ wt830
Також для Electrolux 506029: Посібник (20 сторінок)
Друкувати сторінкуHot Water Sanitizing Pot and
Pan Washer – 34.50" WT830
Warewashing
Hot Water Sanitizing Pot and
Pan Washer – 34.50" WT830
506029 (WT830M208U)
506030 (WT830M240U)
Short Form Specification
Item No. ___________________________________
Unit to be Electrolux WT830 Hot Water Sanitizing Pot and Pan
Washer. Electrical characteristics to be ____ 208 V or ____ 240 V
three phase operation with three automatic cycles of 6, 10 and
15 minutes using 1.6 gallons of fresh 180 °F final rinse water per
cycle. Rinse temperature and rinse pressure guaranteed by built
in hot water booster heater and built-in rinse water booster pump.
Washing performance is guaranteed by a 3.5 HP wash pump,
upper and lower revolving washing spray arms as well as lateral
spray arms. Wash water pressure can be regulated between top
and bottom washing arms. 304 stainless steel construction to
include frame, wash tank, booster tank and side panels.
Covered by Electrolux Platinum Star® Service Program two-year
parts and one-year labor warranty, installation start-up and per-
formance check-up after one year from installation.
Approval: ___________________________________________
10200 David Taylor Drive, Charlotte, NC 28262 • Telephone Number: 866-449-4200 • Fax Number: 704-547-7401
Warewashing
Electric Pot and Pan Washer
34.50"– 208 V
Electric Pot and Pan Washer
34.50"– 240 V
Electrolux Professional, Inc.
www.electroluxusa.com/professional
ITEM # _______________________________________________
MODEL # _____________________________________________
PROJECT NAME # ______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Main features
• Built-in booster heater sized to raise incoming 120 °F water to 180 °F for
sanitizing rinse. No external booster heater required.
• Unique temperature interlock guarantees required sanitizing temperatures
thereby ensuring that NSF mandated temperatures are maintained.
• Built in booster combined with the rinse booster pump for perfect rinsing
performance in terms of sanitization, energy savings (water temperature
always constant during rinse cycle), independent from water pressure of the
network.
• Requires only 1.6 gallons of water per cycle.
• 4 washing programs 6, 10 or 15 minute as well as continuous wash cycle.
• Maximum 10 cycles per hour on 6 minute cycle.
• 304 stainless steel construction to include frame, wash tank, booster tank
and side panels.
• Revolving stainless steel wash/rinse arms above and below the rack.
• Wash and rinse arms easy to remove without the use of a tool.
• Wash water pressure can be regulated between top and bottom wash arms.
• Side washing arms for extra washing performance.
• Side washing arms, easily removable for cleaning.
• Smooth surfaces and wash tank with rounded corners to facilitate cleaning.
• Primary and secondary strainers for enhanced particle filtering, easy to
remove without having to remove wash and rinse arms.
• Self cleaning cycle.
• Easy access to wash chamber thanks to 180° front opening door.
• Requires limited space for opening thanks to the cantilevered 2 part door.
• Double skin construction with sound insulation for quiet operation.
• State of the art electronic controls with built in programming, self
diagnostic for serviceability.
• Digital read out keeps operator informed as to cycle status and
temperatures.
• Element protection from dry fire and low water.
• Pre arranged for automatic detergent dispensers.
• Height adjustable feet.
• Stainless steel basket for pots and pans included.
• Sheet pan insert included for 3 full size sheet pans.
• Low noise level.
• 97% recyclable by weight.