ATIGO A3101 Посібник з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу для Домофонна система ATIGO A3101. ATIGO A3101 7 сторінок. 2-wire video system
Також для ATIGO A3101: Посібник з монтажу (11 сторінок), Посібник з монтажу (15 сторінок)
Друкувати сторінкуIntroduction
The Atigo door entry system is a 2-Wire
system that can be expanded up to 4
entrance panels and up to 32 internal
monitors per system.
For programming camera module use built in
set of DIP switches and touch keys.
The camera module has built in visual and
audible status indictors as well as white LED
for night view.
Installation Notes:
Wire up the system in accordance with the
Wiring diagram supplied.
Make sure A2300 is installed next to the
Power supply when installing multiple
Entrances.
Set each Door Station ID as per instructions
on Page 3
Set the address for each handset by following
programming instructions supplied with the
unit.
2 |
P a g e
System Layout:
Maximum of 4 monitors can be connected to
a single call button.
Maximum of 4 monitors can be connected in
daisy chain configuration
Maximum of 4 monitors can be connected to
a single A2200 in distributor mode (DIP
switch 1 OFF)
Maximum of 4 A2200 units can be connected
to single A2200 in raiser mode (DIP switch 1
ON)
Maximum of 32 monitors can be connected in
any given system.