Andis SUPER AGR+ Інструкція з використання та догляду - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з використання та догляду для Машинка для стрижки волосся Andis SUPER AGR+. Andis SUPER AGR+ 13 сторінок. Andis cordless clipper specifications
Також для Andis SUPER AGR+: Технічні характеристики (1 сторінок)
Друкувати сторінку
IMPoRTANT sAFeGUARDs
When using an electrical appliance, basic precautions should always be
followed, including the following: Read all instructions before using the Andis Clipper.
DANGeR:
To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water. Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in,
or drop into, water or other liquid.
4. Except when charging, always unplug this appliance after using.
5. Always unplug this appliance before cleaning, removing or assembling parts.
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Close supervision is necessary when this appliance is used by, on, or near children or individuals
with certain disabilities.
2. Use this appliance only for its intended use as described in this manual. Do not use attachments
not recommended by Andis.
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water. Return the appliance to an Andis
Service Center for examination and repair.
4. Keep cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen
is being administered.
7. Do not use this appliance with a damaged or broken comb or blade, as injury
to the skin may occur.
8. To disconnect remove plug from outlet.
9. WARNING: During use, do not place or leave appliance where it may be (1) damaged
by an animal or (2) exposed to weather.
10. Plug charger directly into receptacle - do not use an extension cord.
11. Unplug charger before plugging or unplugging appliance.
12. Use of charger not sold by Andis may result in risk of fire, electric shock, or injury to person.
13. Do not disassemble charger; take it to an Andis Authorized Service Station when repair
is required. Incorrect reassembly may result in a risk of electric shock or fire.
14. The batteries in this clipper have been designed to provide maximum trouble-free life. However,
like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt
to replace the batteries.
15. To preserve natural resources, please recycle or dispose of expired battery pack properly. This
product contains a nickel-metal hydride battery. They must be disposed of properly. Local,
state, or federal laws may prohibit disposal of nickel-metal hydride batteries in ordinary trash.
Consult your local waste authority or call 1-800-822-8837 for information regarding available
recycling and/or disposal options.
16. Battery pack removal and preparation for recycling:
WARNING: Upon removal, cover the battery pack's terminals with heavy
duty adhesive tape. Do not attempt to destroy or disassemble battery
pack or remove any of its components. Nickel-Metal Hydride batteries
must be recycled or disposed of properly. Also, never touch both
terminals with metal objects and/or body parts as short circuit may
result. Keep away from children. Failure to comply with these warnings
could result in fire and/or serious injury.
sAve THese INsTRUCTIoNs
THIs PRoDUCT Is INTeNDeD FoR CoMMeRCIAL Use
Model AGRC Cord Pack Use (sold separately)
1. The AGR+ clipper can be used with either the cord pack
or the battery.
2. Remove the transformer wall plug and clipper from the carton.
3. With the clipper in the off position, insert the adapter plug into
the bottom of the clipper. Note that the adapter plug is fitted
with a tongue to align properly with the groove in the clipper.
Once the adapter plug and clipper are aligned, press firmly together.
You may hear a click as the adapter plug contacts engage.
4. Plug the transformer wall plug into the AC outlet as identified
on the carton.
5. The clipper is now ready to be used.
Model AGR+ Battery and Charging stand (included)
ReAD THe FoLLoWING BeFoRe CHARGING THIs CLIPPeR
1. Remove the charger from the carton and plug into an AC
outlet as identified on charger unit and on carton.
2. Place the Andis Model AGR+ Cordless Clipper in the form fitting
pocket in the charger base. Note that the battery pack is fitted
with a slot to align properly with the charger. Once the battery
and charger are aligned, press the battery pack firmly into the
charger until it rests at the bottom of the pocket. You may
hear a click as the charging contacts engage, this is normal.
The battery pack may be charged while on the clipper,
or separately. Push the battery release button (Diagram B)
on the clipper, and pull straight out to remove the battery.
1
Tongue
Adapter
Plug
Transformer
Wall Plug
Diagram A
2