AirTech 3AV430 Інструкція з ремонту - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з ремонту для Водяний насос AirTech 3AV430. AirTech 3AV430 10 сторінок.
Друкувати сторінку
Repair Instructions 3AV 30 - 430
Reassembling Pump
2
(e.g. 3AV 55)
Thoroughly clean all parts before reassembly, be sure to remove all old gasket mate-
rial from mounting flanges. Remove burrs from mating surfaces and mounting faces.
Remove rust at seat for mchanical seal.
Reassembling Mechanical Seal
2.1
2.1.1
Rotating part of Mechanical Seal
Coat the O-ring of mechanical seal with thin-bodied oil
Move mechanical seal (047) over the shaft of impeller (230). Don't touch the surface of the mechanical
seal. Coat the bore of impeller with molykote
2.1.2
Standstill part of Mechanical Seal
Coat the O-ring of mechanical seal with thin-bodied oil
Install mechanical seal (047) at shaft seal housing (441). Don't touch the surface of the mechanical
seal
CAUTION
5