Electrolux CG920FGS Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Electrolux CG920FGS. Electrolux CG920FGS 6 сторінок.
Друкувати сторінку
INSTALLATION
Fig. 11
10. Install internal exhaust duct to suit installation type.
Fig. 12
7
User manual_CG920FGS
11. Install bottom section of telescopic flue cover.
Fig. 13
12. Install the top section of the telescopic flue cover by
sliding up and securing the top flue to the wall mounting
bracket with the screws provided.
130mm
130mm
Fig. 14
USING YOUR RANGEHOOD
CONTROL PANEL
• Best results are obtained by using a low speed for normal
conditions and a high speed when odours are more
concentrated.
• Turn the hood on a few minutes before you start cooking.
• The hood should be left on for about 15 minutes after
cooking, or until all odours have disappeared. The control
switches are located on the unit's front panel (Fig. 15).
• The control panel comprises of:
– T: Indicator lamp
– U: Light button
– V: Off button
– W: Fan speed selection.
1 dot = low speed for light frying/boiling.
2 dots = medium speed for frying/
wok cooking/heavy boiling.
3 dots = high fan speed for grilling/
intensive frying/and wok cooking.
Fig. 15
MAINTAINING YOUR RANGEHOOD
WARNING
IMPORTANT: The hood must always be disconnected from the
electricity supply before beginning any maintenenace work.
Cleaning the hood
• Clean the outside of the hood using a damp cloth and
a solution of water and mild washing up liquid.
• Never use corrosive, abrasive or flammable cleaning
products or products containing bleach.
• Never insert pointed objects in the motor's
protective grid.
• Only ever clean the switch panel and filter grill using a
damp cloth and mild washing up liquid.
• It is extremely important to clean the unit and change the
filters at the recommended intervals. Failure to do so will
cause grease deposits that could cause a fire.
NOTE: The metal grease filters must be removed and
washed, either by hand or in the dishwasher, at least
every four weeks.
Removing the metal grease filters
• Push the grease filter towards the left side of the unit and
then pull it down.
Hand washing
Soak grease filters for about one hour in hot water with a
grease-loosening cleaner, then rinse off thoroughly with hot
water. Repeat the process if necessary. Refit the grease filters
when they are dry.
Dishwasher
Place grease filters in the dishwasher. Select the most
powerful washing program and highest temperature, at
least 65°C. Repeat the process. Refit the grease filters when
they are dry. When washing the metal grease filter in the
dishwasher a slight discolouration of the filter can occur, this
does not have any impact on it's performance.
28/11/2012
8