Atlas PA60G Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Atlas PA60G. Atlas PA60G 12 сторінок. Commercial amplifiers
Друкувати сторінку
Front Panel
AtlasSound.com
Balanced Input
1. Power Indicator
This LED illuminates when the AC Mains is plugged in.
2. Limit Indicator
The LIMIT LED will illuminate when the PA40G/PA60G is in a clipping condition, caused by excessively high input levels or a GAIN
control is turned up too high. An occasional flash is OK. Check that the proper signal level is being fed into the inputs and/or turn the
input gain down until the LED is no longer illuminated. Refer to Limit LED & Load Conditions for more information.
3. Signal Indicator
When the signal LED illuminates, this indicates that input signals connected to the amplifier are capable of driving the PA40G/PA60G to
full power.
4. Input 1 Gain
Input 1 level control potentiometer varies the amplitude of the signal fed into the amplifier. Turn clockwise to increase and
counter-clockwise to decrease the signal level.
AtlasSound.com
PA60G Front Silkscreen Artwork
PA40G / PA60G
Commercial Amplifiers
Power
Limit
Signal
1601 Jack McKay Blvd
1
2
Ennis, TX 75119
800.876.3333
Left In
Right In
Summed Inputs
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
3
Telephone: 800.876.3333 • Fax: 800.765.3435
– 6 –
Owner's Manual
Level
4
60 Watts
70.7V/100V
Speaker Out
100V - 240V 50Hz/60Hz 1A