Atlas Kaye AC-MGM2W Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вентилятор Atlas Kaye AC-MGM2W. Atlas Kaye AC-MGM2W 8 сторінок. Wall mounted
Також для Atlas Kaye AC-MGM2W: Інструкція з експлуатації (9 сторінок)
Друкувати сторінку
MOUNTING/INSTALLATION
OF THE WALL CONTROL
1. Remove the existing wall plate and switch.
(Fig. 5)
2. Set knobs on the new, wall control in the
"0" position.
3. Make speed control wire connections (Fig.
6). Ensure that bare wires are fully inserted
into their terminals with no loose strands
and that terminal screws are fully tightened .
•
Hot wire from fan blade motor to wall speed
control port labeled "Fan."
• Hot wire from oscillation motor to wall speed
control labeled "Oscillation". Note: Perform
this step if yours
installation.
If this
application, this step will be ignored and the
blade motor and oscillation motor will not be
operated independently.
• Hot, household supply wire to wall speed
control port labeled "To Hot."
4. Connect, if present, the wall speed control's
ground wire directly to one of the screws
from the outlet box. (Fig. 7)
5. Attach the wall control to the outlet (wall)
box and secure with 2 outlet box screws.
(Fig. 7)
6. Attach the wall plate to the wall speed
control
and
secure
screws. (Fig. 7)
is a two/dual
circuit
is a single
circuit
with
2 mounting
6
s._- ..
Figure 5
HoI black/while household supply
Black/Hot 10 fan
Figure 6
Screws
Screws
o
~
.....
Figure 7
Switch
/
Screws
/
'--'1!lDJI@
Blue/Hollo
OSC. (fan)
Green ground lead
Outlet box
/