Atlas Copco 270PS Посібник з техніки безпеки та інструкція з експлуатації - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник з техніки безпеки та інструкція з експлуатації для Електроінструмент Atlas Copco 270PS. Atlas Copco 270PS 19 сторінок. Handheld pneumatic breakers
Друкувати сторінку
TEX 140PS, 150PE, 180PS, 190PE, 220PS, 230PE,
270PS, 280PE
Start and stop
ON
Start the pneumatic breaker by pressing down the
start and stop device.
OFF
Stop the pneumatic breaker by releasing the start
and stop device. The start and stop device will
automatically return to the stop position.
Operating
Starting a cut
Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
Never try to break off too large pieces. Adjust the
♦
breaking distance (A) so that the inserted tool does
not get stuck.
© 2012 Atlas Copco Construction Tools AB | No. 9800 0683 82f | 2012-08-07
A
Safety and operating instructions
Breaking
Let the machine do the work; do not press too
♦
hard. The vibration-reducing handle must
absolutely not be pressed all the way down to the
base.
♦
For pneumatic breakers with vibration-reducing
handles: The feed force should be adapted so that
the handles are pressed down 'half way'. The best
vibration damping and breaking effect is achieved
at this position.
Avoid working in extremely hard materials for
♦
example granite and reinforcing iron (re-bar) which
would cause substantial vibrations.
Any form of idling, operating without insertion tool
♦
or operating with an uplifted machine must be
avoided.
When the machine is lifted, the start and stop
♦
device must not be activated.
♦
Check regularly that the machine is well lubricated.
When taking a break
During all breaks you must place the machine in
♦
such a way that there is no risk for it to be
unintentionally started. Make sure to place the
machine on the ground, so that it can not fall.
In the event of a longer break or when leaving the
♦
workplace: Switch off the power supply and then
bleed the machine by activating the start and stop
device.
17