Bose 802 Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з монтажу для Спікери Bose 802. Bose 802 13 сторінок. Iv series
Також для Bose 802: Короткий посібник (2 сторінок)

Друкувати сторінку

Installation

Mounting the 802

The 802 Series IV loudspeaker can be mounted on a speaker stand, such as the Bose

with thumb screws for attaching the speaker to the adapter on the top of the stand.

Note: Other stands have not been tested and may create a tipping hazard.

Figure 2. Panaray

802 Series IV loudspeaker on a Bose SS10 Speaker Stand

Bose SS10

Speaker Stand

Recommended Power Amplifiers

Selecting the proper amplifier size for a given loudspeaker requires analysis of the transducer long-term (or RMS) power

rating, dynamic range of the input-source material (crest factor), desired sound pressure levels, and other factors. As a

general guideline, the following table provides recommended power amplifier ranges for Bose Panaray

Model

802 Series IV

CAUTION: Failure to follow these guidelines may result in damage to the loudspeaker!

Please refer to the specifications listed on the pro.bose.com website for PowerMatch

table above to determine which PowerMatch model is best for your particular Panaray loudspeaker system design.

Recommended DSP Settings

The Bose Panaray 802 Series IV loudspeaker requires active equalization for optimal sound quality. The recommended

equalization is contained in the preset libraries of the Bose PowerMatch

engineered sound and loudspeaker processors.

8 - English

Series IV Loudspeaker on a Speaker Stand

Nominal Impedance

8 ohms

Required Channels

Configurable Power Amplifiers, ControlSpace

SS10 model. The SS10 comes

loudspeakers:

Amp Power Rating

250 – 500 Watts

amplifiers and compare with the