Bose Panaray 402 Series IV Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з монтажу для Спікери Bose Panaray 402 Series IV. Bose Panaray 402 Series IV 24 сторінки. Full-range-driver array loudspeakers
Також для Bose Panaray 402 Series IV: Посібник з монтажу (32 сторінок)
Друкувати сторінку
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Panaray ® 802 ® Series IV Loudspeaker U-Bracket
- 3. Panaray ® 802 ® Series IV Loudspeaker Mounting Options
- 4. Installation
- 5. Recommended Power Amplifiers
- 6. Recommended Dsp Settings
- 7. Panaray 802 Series IV Loudspeaker Specifications
- 8. Panaray 502 a Series Loudspeaker Specifications
Installation
Place the loudspeaker on the bracket.
5.
Tilt the loudspeaker to the desired angle and insert the second M8 cap screw on each side of the loudspeaker.
6.
Using a 5 mm Allen wrench, tighten all four cap screws to 5.6 Newton-meters (50 inch-pounds).
7.
Connect field wiring and test loudspeaker operation.
8.
SB-8 suspension bracket (for indoor use only)
The SB-8 suspension bracket kit is used for suspension-mounting one 802 loudspeaker. The kit provides 0-45 deg pitch.
10
Wall mount pitch angles
5.6 Nm (50 in-lb)
pro.Bose.com
Ceiling mount pitch angles