Atlas Copco PBE 6 S Інструкція з ремонту - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з ремонту для Дриль. Atlas Copco PBE 6 S. Atlas Copco PBE 6 S 11 сторінок.
Друкувати сторінку
1
Mounting the
Press the needle bearings (4 and 7) into
gear box cover
the gear box cover (3).
2
Place the insert (5) into the gear box
cover (3) (mind the right position!) and fit
the gasket (6).
3
Fit the gear box cover (3) and fasten it with
the screws (8).
4
Insert the grease seal (2) and the
O-ring (1) into the gear box cover (3).
1
Mounting the
Insert the spindle sleeve (7) into the hous-
flange
ing (6).
2
Fit the flange (5) with the ring (8) to the
housing (6) and fasten them with the se-
cured screws (1).
3
Mount the O-rings (3 and 4) and the
sleeve (2).
1
Assembling the
Insert the rubber ring (9), the recoil
spindle
ring (A), the spacer (B), and the grease
seal (C) into the flange (see assembly
step 4).
2
Insert the snap die (D) into the tool recep-
tion (8).
3
Insert the tool reception (8) completely
with the snap die (D), the spacer (7) and
the O-ring (6) into the gear box.
4
Fit the adapter sleeve (2) and fasten it with
the secured screws (1).
5
Insert the four balls (3) into the adapter
sleeve (2).
Repair Instructions No.182.03/98
5
4
3
2
1
4
2
3
1
4
5
3
2
1
PBE 6 S
6
7
8
5
7
6
8
6
7
8
A
9
D
C
B
PAGE
8
3
4
5