Atlas Copco PHE 3X Інструкція з ремонту - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Дриль. Atlas Copco PHE 3X. Atlas Copco PHE 3X 14 сторінок.

Dismantling the

1 Removing the locking sleeve (2):

FIXTEC-

Fix the locking sleeve in a pulling off

Reception

device (3) and press it out (by using a

(only applicable

suitable sleeve (1)).

for PHE 3 X)

2 To remove the balls (4) (6 pieces):

depress the seal ring (6) and remove the

balls with aid of a magnet.

3 Remove the remaining parts:

- seal ring (6)

- outer spring (7)

- ejector ring (5)

- inner spring (8)

- washer (9)

Removing the

1 Removing the switch lever (4):

gear housing

Switch the lever to „0" and break it off

with aid of pliers (the lever is being

destroyed).

switch in a vice and break it off by

moving the machine to and fro. Remove

any broken parts from the machine!

2 Remove the four housing screws (1).

3 To remove the locking ring (2) (only

applicable for PHE 3 X): open the locking

ring on the spindle with aid of special

pliers (5) (4931 5990 57) and remove it

together with the gear housing (3).

Removing the

1 Remove the two screws (1).

spindle

2 Remove the straight pin (5).

3 Remove the planetary gear (6) and the

ring gear (7).

4 Remove the complete spindle sleeve (2)

from the cylinder.

Should this not be possible fix the

Repair Instruction No. 175.8/95

1 2

PHE 3, PHE 3X

PAGE