Atlas Copco 4220 4522 82 Інструкція до продукту - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція до продукту для Інструменти Atlas Copco 4220 4522 82. Atlas Copco 4220 4522 82 8 сторінок. Operator handle
Друкувати сторінку
Operator handle
This instruction describes configuration of an operator handle with the
Power Focus controller. Perform the steps after installing the operator han-
dle.
1. Connect the tool and the Power Focus controller.
2. Switch on the controller.
3. Press PROG to start the configuration.
4. Select Tool and press ENTER to confirm the selection.
5. Select Configuration and press ENTER to confirm the selection.
6. Select Start and press ENTER to confirm the selection.
7. Select Tool start select source and press ENTER to confirm the selection.
8. Select Safety trigger and press ENTER to confirm the selection.
9. As a result Safety trigger appears instead of Tool trigger in the right up-
per corner.
10. Press Store to store all selected values in memory. The safety trigger is
now activated on the tool.
For more information of the Power Focus controller, see the applicable user
guide.
EN
© Atlas Copco Industrial Technique AB - 9836 713000 00
Instruction supplement
5