Bose Wave radio Series III Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Bose Wave radio Series III. Bose Wave radio Series III 26 сторінок. Enabling standby low power mode
Також для Bose Wave radio Series III: Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
Unpacking the carton
Figure 1
What comes with your
Wave radio
Selecting a location for your radio
Carefully unpack your system. Save all packing materials for possible future use. The original
packing materials provide the safest way to transport your Wave
product appears damaged, do not attempt to use it. Notify Bose
ately (see phone numbers on the inside back cover).
Check to be sure your Wave radio contains the parts identified in Figure 1.
Note: Find the serial number on the bottom of your radio. Write it on your warranty card and
in the space provided on page 3.
Wave radio
Please keep these guidelines in mind when selecting a location for your radio:
• Place the radio on a table or other flat surface.
• Do not use the radio in a damp location. It is important to prevent moisture from getting
into the unit.
• Do not place it on a metal surface or table that could interfere with AM reception.
• Since all electrical equipment generates some heat, do not place it on a heat-sensitive
surface.
• If you use the radio with your television or VCR, do not place it directly on top of the
television. It may interfere with the picture quality.
• A location within two feet of a wall is recommended for best bass performance.
• You get the maximum sound from your radio if you are able to place the radio across the
room from where you will be listening.
Please adjust the location to get the sound you prefer.
®
radio. If any part of the
®
Customer Service immedi-
Remote control
9V
battery
Power cord
Setting Up
Lithium
battery
Mounting strip
5