3M G5 Технічний бюлетень - Сторінка 2

Переглянути онлайн або завантажити pdf Технічний бюлетень для Гарнітури 3M G5. 3M G5 6 сторінок. Drive-thru systems
Також для 3M G5: Короткий довідник (2 сторінок), Технічний бюлетень (2 сторінок), Посібник (10 сторінок), Посібник із швидкого старту (3 сторінок), Технічний бюлетень (12 сторінок), Посібник (8 сторінок)

Optimizing Inbound audio level:

1. Proper fitting of headset

Make the following adjustments to the headset to make sure it is not only comfortabl e , less likely to fall off and easy for you to hear

and speak clearly; but to also make sure the speaker on the headset is properly aligned to your ear.

a) Adjust the size of the headband until the ear pad rests against one ear and the comfort pad cushi o n rests just above the

other ear.

b) To create a tighter fit, hold the headset with one hand on the Pod area and the other hand on the Comfort Pad area.

Gently bring the two hands close to one another, then past one another. Slowly move one end back and forth.

c) This ensures pressure is applied equally along the length of the headband. Applying excessive force in one area alone wi l l

create a crease on the headband.

d) Rotate the microphone boom up or down so its ti p is in line with the corner of your mouth. Do not bend the boom.

e) Make sure the headset speaker foam covers your ear.

2. Volume setting on headset

Slide your finger up the Volume control area to raise the volume on the headset.

Volume C ontrol