DS Produkte 20002 Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Освітлювальне обладнання DS Produkte 20002. DS Produkte 20002 6 сторінок. Light tree

Друкувати сторінку

■

Protect the article from heat, naked ﬂ ames, extreme tempera-

tures, wet conditions and collisions.

■

Use only original spare parts from the manufacturer.

■

If the article is broken, do not attempt to repair it yourself. In

the event of any damage, please contact our customer service

department.

Items Supplied and Article Overview

Unpack all parts and check the items supplied for completeness

and any transport damage. If you ﬁ nd any damage to the com-

ponents, do not use them (!), but contact our customer service

department.

1 Pegs (2 x)

2 Ground spike

3 Holding rod (4-piece)

4 Light chain with 66 LEDs incl. battery case

Not shown: Suction pads with hooks (3 x)

You also require 3 x 1.5 V batteries (AA type) for the light

chain. These are not supplied with the article.

Assembly

CAUTION!

■

Beware of falling! Make sure that the ends of the light chain

and the pegs do not present a trip hazard.

■

Read through the assembly instructions carefully before as-

sembling the article.

■

Always anchor the article in a ﬁ rm surface when using it with

the ground spike.

Inserting / Changing Batteries

1. Open the battery case by ﬂ ipping up the two locking catches

and opening up the battery case cover.

2. Insert 3 x 1.5 V batteries of the AA type. Pay attention to the

correct polarity (+ / –).

3. Flip the cover shut again and close the two locking catches

again. You should feel and hear them click into place.

Use with Ground Spike

1. Plug together the ground spike and the holding rod (4-piece)

and anchor ﬁ rmly in the ground.

2. Hang the light chain with the eyelet on the hook on the holder.

3. Secure the two ends of the light chain on the pegs.

4. Anchor the pegs in the ground. When you do this, make sure

that the light chain is pulled far enough apart. The pegs must

be fully anchored in the ground and must not stick out.

5. Store away the battery case so that it is protected from persis-

tent wet conditions (e.g. also hang it on the hook on the ground

spike).

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

Instructions

Customer Service / Importer:

*) Calls subject to a charge. Costs vary depending on the provider.

Use with Suction Pads

1. Attach one suction pad with a hook on a smooth, non-greasy

surface. For a secure hold, make sure that the suction cup is

free of residues as well.

2. Hang the light chain with the eyelet on the hook on the suction

pad.

3. Secure the two ends of the light chain on the other two suction

pads.

4. Attach the two suction pads on a smooth, non-greasy surface.

When you do this, make sure that the light chain is pulled far

enough apart.

5. Store away the battery case so that it is protected from persis-

tent wet conditions.

A suction pad with a hook and pegs can also be used in

combination to secure the article if for example there is a

ﬂ ower bed in front of a window into which the pegs can be

ﬁ rmly anchored.

Use

1. To switch on the article, press the On / Off switch once for the

timer or twice for constant operation.

The timer should be switched on when darkness begins to

set in so that the presettings switch the article on again in

the evening.

Sequence: 6 hours on, 18 hours off.

2. To switch the article off again, press the On / Off switch either

twice (with timer setting) or once (with constant operation).

Cleaning and Storage

CAUTION!

■

Do not use any caustic or abrasive cleaning agents for clean-

ing. These can damage the surface.

•

Clean the article with a damp, soft cloth and, if necessary, mild

cleaning agent. Then dry it fully with a dry, soft cloth.

•

Keep the article in its original packaging out of the reach of

children and animals in a dry, clean place that is protected from

direct sunlight and frost.

Technical Data

Article number:

04281

Model number:

20002

Power supply:

4.5 V DC (3 x 1.5 V batteries, AA type)

Disposal

The packaging material is recyclable. Dispose of the pack-

aging and the article in an environmentally friendly manner

and take them to a recycling centre.

The batteries should be removed prior to disposal of the

article and disposed of separately from the article. To protect

the environment, non-rechargeable and rechargeable

batteries may not be disposed of with normal household

waste, but must be taken to suitable collection points.

Also note the relevant statutory regulations governing the

disposal of batteries.

✆

+49 38851 314650 *)

Article number: 04281

Z 04281 M DS V1 0517