ATX SignalOn Series Посібник з монтажу та експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Підсилювач ATX SignalOn Series. ATX SignalOn Series 16 сторінок. L-band splitter module
Також для ATX SignalOn Series: Посібник з монтажу та експлуатації (16 сторінок)

Друкувати сторінку

Introduction

The SignalOn Series L-Band Module is designed to be installed in the 4-, 8-, or 20-position SignalOn Series chassis. Each

module occupies one positions in the chassis. The mechanical dimensions, cable management, and aesthetics of the L-Band

Module are compatible with the SignalOn product line. The system is designed to accommodate superior cable management

and ease of use.

Admonishments

Important safety admonishments are used throughout this manual to warn of possible hazards to persons or equipment.

An admonishment identifi es a possible hazard and then explains what may happen if the hazard is not avoided. The

admonishments — in the form of Dangers, Warnings, and Cautions — must be followed at all times. These warnings are

ﬂ agged by use of the triangular alert icon (seen below), and are listed in descending order of severity of injury or damage

and likelihood of occurrence.

Danger: Danger is used to indicate the presence of a hazard that will cause severe personal injury, death, or substantial

property damage if the hazard is not avoided.

Warning: Warning is used to indicate the presence of a hazard that can cause severe personal injury, death, or substantial

property damage if the hazard is not avoided.

Caution: Caution is used to indicate the presence of a hazard that will or can cause minor personal injury or property

damage if the hazard is not avoided.

General Safety Precautions

Warning: Wet conditions increase the potential for receiving an electrical shock when installing or using electrically-powered

equipment. To prevent electrical shock, never install or use electrical equipment in a wet location or during a lightning

storm.

Certifi cation

SignalOn Forward Path products have been tested and found to comply with the requirements of UL 60950, and CSA 22.2

No. 0.7, emissions EN55022 radiated and conducted.

FCC Compliance Statement

The SignalOn Forward Path Amplifi er product line has been certifi ed to comply with the requirements for class A computing

devices per part 15 of the FCC regulations.

Warning: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance

with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with

limits for a Class A digital device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable

protection against such interference when operated in a commercial environment. Operation of this equipment in a residential

area is likely to cause interference to TV and radio reception in which case the user, at their own expense, will be required to

take whatever measures may be required to correct the interference.

This equipment does not exceed Class A limits for radio emission for digital apparatus, set out in the radio interference

regulation of the authorization methods of Industry Canada. Operation in a residential area may cause unacceptable

interference to TV and radio reception requiring the owner or operator to take whatever steps are necessary to correct the

interference.

SignalOn

Series – L-Band Splitter Module – Installation & Operation Manual

PREFACE

iii