3rd Power Dream Weaver 112 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач 3rd Power Dream Weaver 112. 3rd Power Dream Weaver 112 15 сторінок. Combo & head

Друкувати сторінку

B A C K P A N E L :

AC Input (17)

The AC INPUT socket (TYPE IEC Grounded) is a required connection for operating your ampliﬁer

at 120V (standard USA household electrical power).

Mains Fuse (18)

The MAINS FUSE requires a 2 AMP fast-acting fuse. This fuse protects your ampliﬁer from volt-

age peaks from your power outlet.

H.T. Fuse (19)

The H.T. FUSE requires a .3 AMP (300 milliamp) slow-blow fuse. The H.T. FUSE usually blows if

your power tubes are bad to protect the circuit from being damaged.

SAFETY NOTES:

• Always plug your amp into a properly grounded 3 prong AC outlet.

• Never plug your amp into an ungrounded outlet.

• Never remove or break off the 3rd prong safety ground pin from the power

cord.

• Never use a damaged or ungrounded power cord.

• Always use the proper value and type fuse according to the rear-panel

markings.

• Never attempt to replace the fuse while the ampliﬁer is still plugged into

the power source. The fuse should only be replaced when the power cord

has been disconnected from its power source.