AODELAN WTR-2R Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування AODELAN WTR-2R. AODELAN WTR-2R 19 сторінок. Wireless timer remote shutter release

Друкувати сторінку

Using the Backlight on WTR-2(T) or TRS-1

1. Use the Backlight to illuminate the LCD screen.

2. Press and release the Backlight / Lock Button, the

backlight will illuminate the LCD for approximately 10

seconds before turning off automatically.

Using the Lock Button on WTR-2(T) or TRS-1

1. The Lock Button disabled all buttons. This can

be useful when running a long multiple exposure

program.

2. Press and hold the Backlight / Lock Button. A lock

symbol will appear on the LCD. No buttons will

function after the unit is locked.

3. To disengage: Press and hold the Backlight / Lock

Button again until the lock symbol disappears.

The Wireless Signal Strength Indicator

WTR-2(T)

1. The Wireless Signal Strength Indicator on the LCD

shows the signal strength between the Timer WTR-

2(T) and Receiver WTR-2(R) if the WTR-2 system is

being used wirelessly.

2. Use this as an indication of range – when the Timer

and Receiver are within range the three bar icon will

appear on the LCD.

3. When the Timer and Receiver are not in range the

three bar icon will not appear.

Note: TRS-1 has no radio function, so the Wireless

Signal Strength Indicator is not available on its LCD.

• 8 •

[ Note ]