audiophile Aurender N100 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Медіаплеєр audiophile Aurender N100. audiophile Aurender N100 6 сторінок.

AES/EBU and SPDIF outputs & inputs are universally compatible. However, with USB,

compatibility between any two devices is not always guaranteed! Sometimes, special

drivers or software provisions must be made to establish compatibility over USB.

DACs that fully adhere to the USB Audio Class 2 (UAC2) protocol will be supported

without issue.

For DSD playback, if the DAC supports the industry standard DoP protocol, then it

will be compatible with Aurender's DSD output. DoP is a lossless, unadulterated

transmission of DSD from source to DAC. It is NOT to be confused with DSD-to-PCM

transcoding, which is usually less desirable from an audio performance perspective.

On some Aurender models (see "File Type & Resolution Support" comparison table

below), "Native" DSD output is available via USB. However, only a very small handful

of select DACs support "Native" DSD input FROM A LINUX BASED SOURCE. Most

DACs that report Native DSD input only work with ASIO drivers for Windows

computers. Native DSD compatibility must be detected and enabled on a case-by-

case basis.

In general, if a DAC works with a Mac computer without the need for any custom

drivers, it will work beautifully with Aurender servers as well. Consult your DAC

manufacturer for confirmation of USB compatibility with a Linux based sourced

component like Aurender.

Front Panel

1. On/Off

With the AC switch on the rear in the ON position, simply press and release the front

panel On/Off button to turn the Aurender on or off. The surrounding LED light will

pulse while the unit is starting up or shutting down, and it will stop pulsing when

fully turned on or off. Pressing and holding the On/Off button will trigger a forced

shut down and this should be avoided. More information on proper shut down

procedure is found here:

https://aurender.zendesk.com/hc/en-

us/articles/360026675874-What-is-the-proper-way-to-shut-down-my-Aurender-

2. Display Menu