audiophile Aurender N100 Посібник із швидкого старту - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Медіаплеєр audiophile Aurender N100. audiophile Aurender N100 6 сторінок.
The Aurender must be connected to your Local Area Network via Ethernet (CAT5 or
higher). In case there is no Ethernet connection available in the location where your
Aurender is to be installed, please see the following support article for other options:
What if I do not have an Ethernet/LAN connection in my listening room?
3. USB 2.0 data ports
The Aurender must be connected to your Local Area Network via Ethernet. In case
there is no Ethernet connection available in the location where your Aurender is to
be installed, please see the following support article for other options:
What if I do
not have an Ethernet/LAN connection in my listening room?
4. AC Power Switch
Press the rocker switch away from the AC power socket to turn AC power on, press
towards the AC power socket to turn it off. The rear panel power switch should be
used to turn the unit off only after the unit has been shut down via the front panel
On/Off button or via the app. The front panel On/Off button LED light will pulse
while the unit shuts down. Once it is dimly lit after shut down procedure is complete,
it is safe to flip the rear panel AC power switch to the "off" position. More information
on proper shut down procedure is found here: What is the proper way to shut down
my Aurender?
5. AC Power Socket
Connect an IEC AC Power cord to a grounded power source/outlet.