audiophony CR12A-Combo Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Стереосистема audiophony CR12A-Combo. audiophony CR12A-Combo 14 сторінок. 120w bluetooth sound system with usb player and 2 uhf handheld mic
Друкувати сторінку120W B
CR12A-COMBO -
4 - 8 : Optional headband transmitter system:
1
2
0dB
INPUT
MIC
-10dB
6
1
®
LUETOOH
SOUND SYSTEM WITH
4
STANDBY
ANT
ON
OFF
3
5
7
3
USB
2
PLAYER AND
1 - Jack 3.5 input to connect the microphone
2 - Input level selector. MIC is the standard configuration for
the headband microphone. You can switch to the 0dB or -10dB
positions if you want to use another type of microphone.
3 - ON/STANDBY/OFF power switch. The middle position allows
you to cut the microphone without interrupting the HF signal.
4 - Battery level indicator.
The indicator flashes in red when the batteries are discharged.
The indicator flashes in red when the ASC function is activated.
5 - Flexible antenna.
6 - Synchronisation IR diode. The ASC (Auto Synchro
Connection) function allows you to synchronise a chosen
channel between the transmitting microphone and the receiver
via InfraRed transmission.
To do so, select a channel (from 1-16) on the receiver. Press the
ASC button and put the IR diode of your microphone in front of
the IR diode (#9) of the receive
7 - Batteries compartment: LR06 x 2. Please make sure you keep
the same polarities if need to replace the batteries.
1 - Connector to plug the bodypack
transmitter. Plug the headband
microphone into the Jack #1 socket of
the transmitter.
2 - Headband. Set the mic position
in order for the capsule to be slightly
below your mouth.
2
3 - Capsule. Transforms the sound
pressure into a signal.
UHF HANDHELD MIC
English
Page 11