AUDIOPROF REVAMP2150 Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Підсилювач AUDIOPROF REVAMP2150. AUDIOPROF REVAMP2150 16 сторінок.

DIGITAL POWER AMPLIFIER

Important notice

This amplifier relies on convectional cooling only. In normal

situations, overheating will not occur due to the class D amplifier

topology. Since there are no cooling fans in the amplifier, make

sure the convectional cooling system can work properly. The unit

can be built in a 19 inch rack system, but it is forbidden to block

the ventilation holes provided. Therefore, it is absolutely necessary

to allow at least one free rack space or 44 mm above and beneath

the amplifier. Make sure the ambient temperature is between 0

and 40°C. Operating the unit beyond its normal limits may cause

overheating. Power amplifiers are hard workers, and their behaviour

is similar to human beings. In extreme conditions, human beings are

not able to perform efficiently. This also applies to amplifiers. It is

generally a bad idea to mount multiple heat generating units such

as amplifiers in the same rack. If necessary, use a forced ventilation

system in your mounting rack.

The mains fuse is located inside the unit. When the fuse is broken,

replace it with a fuse of the same current and voltage rating: T 5 A

L / 250 V. For qualified personnel only!

This unit has NOT been designed for use in mobile applications,

such as: mobile discobars and DJ setups, mobile PA systems, Live

bands, audio rental systems, ...

Use it in fixed installations only.