Apogee Instruments SP-110 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Apogee Instruments SP-110. Apogee Instruments SP-110 20 сторінок. Pyranometer
Також для Apogee Instruments SP-110: Посібник користувача (18 сторінок)

Apogee Instruments SP-110 Посібник користувача
SP-230: Only apply voltage to the integrated heaters. The sensor is self-powered and applying voltage will
damage the sensor.
Wiring for SP-230 Serial Numbers 9898 and above or with a cable connector
Wiring for SP-230 Serial Numbers range 0-9897
White: Positive (signal from sensor)
Blue: Ground (negative lead for heater)
Yellow: 12 V DC (positive lead for heater)
Clear: Shield/Ground
Black: Negative (signal from sensor)
Red: High side of differential channel (positive lead for
sensor)
Black: Low side of differential channel (negative lead
for sensor)
Clear: Analog ground (shield wire)
Green: Ground (negative lead for heater)
White: 12 V DC (positive lead for heater)