Apollo Xpander XPA-CB-14021-APO Посібник з введення в експлуатацію - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з введення в експлуатацію для Датчики безпеки Apollo Xpander XPA-CB-14021-APO. Apollo Xpander XPA-CB-14021-APO 14 сторінок. Diversity loop interface module
Також для Apollo Xpander XPA-CB-14021-APO: Посібник з введення в експлуатацію (19 сторінок)
Друкувати сторінку
Quick Start Guide for XPander Diversity Site Survey
1. Use the site survey tool to check the
signal strength.
2. Record all the survey signal strengths
on the site survey sheet.
3. Fit the interfaces as per the instructions
in the Quick Start guide
4. Log the devices on to the interface as
per the instructions in the Quick Start
guide
5. Check the signal strength for each
logged on device and record it in the site
survey sheet.
Quick Start Guide for XPander Diversity Loop Interface
1. Select the interface number or ID
(Range 1 - 5)
2. Select channels - refer to Appendix B
and the checklist on the inside of the
unit.
3. Set the system address
4. Log on each device to its respective
interface
PP2286/2019/Issue 13
Page 3 of 12
For detailed instructions refer to
page14
For the site survey sheet refer to
page 15
See Quick Start Guide for
XPander Diversity Loop Interface
below
For detailed instructions refer to
page 7
Refer to the site survey sheet,
page 15
For detailed instructions refer to
page 7
For detailed instructions refer to
Appendix B
For detailed instructions refer to
Installation Guide 39214-926
For detailed instructions refer to
page 7