Addvent AVAC9000W Інструкція з монтажу та посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Кондиціонер Addvent AVAC9000W. Addvent AVAC9000W 9 сторінок.

Друкувати сторінку

1. Operation

AVAC9000W[15]instructions

Operation

Power Control

The power control turns the unit on and

off.

Warning Light

Condensed water may accumulate in the

unit. If the internal tank becomes full, the

Warning Light will shine and the unit will

not operate until the unit has been

drained.

Mode Control

The Mode Control has 3 settings:

• Cool • Dehumidify • Fan

The settings are adjusted with Mode

Control button. A light will indicate

which setting is currently being used.

• Cooling Mode

During the cooling mode the air is

cooled and hot air is exhausted to the

outside through the exhaust tube.

Adjust fan speed and air temperature

to suit your desired comfort level.

Note : The air exchange hoses must

vent outside the room when using

cool mode.

• Dehumidify Mode

Air is dehumidified as it passes

through the unit, without being in full

cooling mode. If room temperature is

>25 degree Celsius, fan speed can be

adjusted; otherwise fan speed is fixed

9/4/15

09:43

Page 4

Control Panel

Fan Mode

Fan Speed Control

Timer

Timer / Temp set controls

to "low". Note : If the unit is to be

used as a dehumidifier, do not

connect the exhaust hose let the

warm air return to the room.

Continuous drainage is then

necessary.

Air is circulated throughout the room

with no cooling.

Note: unit does not need to be vented in

Fan mode

The Fan Speed Control has 3 settings:

High, Medium, and Low.

Auto turn off :With machine in running

mode, press timer button to select

number of hours you would like the unit

to run in air conditioning mode until it

automatically shuts off.

Auto turn on : With machine in stand by

mode, press timer button to select

number of hours until you would like the

unit to automatically start running in air

conditioning mode.

• Used for adjusting the timer and

thermostat.

• The default display is room

temperature.