Addvent AVCH60 Інструкція з монтажу та посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Вентиляційна витяжка Addvent AVCH60. Addvent AVCH60 4 сторінки. Cooker hood

The AVCH60 is a 60cm 'domestic-only' Stainless Steel cooker hood
for installation over an electric or gas hob. The hood can be used for
extraction to the outside of a building or for recirculation. Equipped
with a powerful 3-speed electric motor, twin 12v lights and non stick
grease filter, it quietly produces strong suction and is easy to clean.

Safety Warning

G
The cooker hood is for domestic use only and is not suitable for
barbecues or other commercial purposes.
G
The cooker hood should only be operated by a responsible adult.
G
This appliance should be installed by a competent person, if
unsure about installation get a qualified electrician to install the
appliance.
G
The cooker hood and filter mesh should be cleaned regularly to
maintain efficient working.
G
Before cleaning, please switch the power off at the main supply.
G
Clean the cooker hood according to the instructions.
G
If there is any fault with the appliance, please call Addvent on
0117 923 9375 for advice.
Before installation, unpack hood
and check contents.
You should receive:
Hood
Decorative Chimney (bottom and top)
Hood Mounting Bracket
Chimney Mounting Bracket
Discharge Collar
Installation Manual
2m x 150mm diameter Flexible Ducting
Specification
Model AVCH60: Ratings: 220-240V ~50Hz; Motor input: 125W;
Input: 205W; Air flow: 500m
3
/h; Lamps: ≤2x40W
2
Appliance Dimensions
Operation Modes
This cooker hood is designed to be installed for air extraction or air re-circulation.
For air re-circulation charcoal filters are required. For air extraction, use the
150mm diameter flexible ducting provided. Please call Addvent for advice on 0117 923
5375.
Air Extraction:
The air is drawn into the appliance and cleaned by the grease filters and directed
outside.
If the on-site ventilation system does not have a non-return flap, the non-return flap
supplied with the appliance must be fitted in the exhaust socket in the motor unit
(see installation instructions).
Having a non-return flap fitted to the ducting ensures that air, once ducted to the
outside, cannot get back into the room again.
The flap remains closed when the cooker hood is switched off.
When the cooker hood is switched on, the non-return flap opens for the cooking
vapours to be ducted away.
Air Recirculation:
The air is drawn in and cleaned first by the grease filters and then by a charcoal
filter. The cleaned air is then re-circulated back into the kitchen through grilles in
the top of the cooker hood extension piece.
Before using the cooker hood in recirculation mode, ensure that the charcoal filter
is in place.

Before Installation

G
Before installation, please ensure the area is clean.
G
After installation, make sure that the extractor is level.
G
It is prohibited to fit a cooker hood over a solid fuel stove.
G
All materials used in the fitment of this product must be non-flammable.
G
This appliance must not be connected to a chimney or vent flue which is in use.
G
Professional advice should be sought if ducting this appliance into a chimney or
vent flue which is no longer in use.
G
This appliance should not be connected to ducting which ventilates rooms with
fireplaces.
3