ADE GW400-30 Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ваги ADE GW400-30. ADE GW400-30 16 сторінок. Electronic compact scales

- Place the scale as far as possible from other devices or sources that generate

electromagnetic fields or other interferences (e.g., powerful motors and portable and mobile

HF communication devices), as these can falsify the measurement results.

- Use only approved accessories and peripherals.

- Before cleaning the device, pull the mains adapter/plug out of the socket.

- Never clean the scale with abrasive or aggressive cleaning agents.

- Do not immerse the device in water or other liquids.

- If you have problems with this device, e.g., when setting up, maintaining or using, please

contact the authorised customer service. Do not open or repair the device yourself.

- Please notify the authorised customer service if unexpected operations or events occur.

- If the weighing system is not used for a longer period of time, it should be cleaned and stored

in a protective film. The addition of a drying agent is desirable.

DO NOT use the scale:

- if the mains adapter is damaged;

- if the mains adapter is not working;

- if the battery compartment has an unnatural bulge;

- after long storage in a humid environment.

In such cases, please contact authorised customer support.

Your ADE scale is a quality product and was manufactured for use as a non-automatic scale.

The scale is intended for determining the weight of goods and for a variety of other weighing

procedures and applications in the commercial sphere.

To determine the weight properly, place the item to be weighed as close to the centre of the

scale as possible. The scale may be loaded with the maximum load (Max) specified on the

device and the nameplate. After a stable measurement result has been determined, it can be

read off.

The scale must not be used for dynamic weighing. If small quantities are slowly added or

removed (e.g., filling liquids), this can lead to incorrect measurement results.

The device may only be used as intended. All applications of the device that are not mentioned

in the chapter "Intended use", as well as non-observance of the safety instructions, are

considered improper use. It is the user of the device, but not the manufacturer, who assumes

liability for any resulting damage to property or personal injury resulting from misuse.

The use of accessories other than the original accessories supplied by the manufacturer may

void this warranty.

The weighing system may only be used for legal-for-trade weighing if it is

calibrated. The calibration is invalid without a seal.

This device may not be modified without the manufacturer's permission.

4. Intended use

GW400-210408-Rev004-UM-en