Datamaster T0046 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий кабель Datamaster T0046. Datamaster T0046 19 сторінок. Professional lan cable tester
®
Datamaster
T0046 Professional LAN Cable Tester – User Guide
9
COAX MODE – MAIN TO REMOTE TERMINATOR
The COAX mode is capable of testing for the following faults:
•
Open circuit
•
Short circuit
Enter COAX Mode from either the main menu on the screen
or by pressing the blue coloured
Connect the cable between the F-Connector and a
Remote Terminator as shown in the diagram opposite.
Press the
button.
TEST
The display will indicate a PASS if there is no fault.
If there is a FAIL due to a open-circuit fault or a cross, the
word FAIL and digits 1 & 2 (indicating the inner core
conductor and the outer shield) will blink.
TEST RESULTS
If the cable being tested was not faulty, the word PASS and digits 1 & 2 representing the
inner core conductor and the outer shield. The screen-shots show the initial and the result
screens for a non-faulty Coaxial cable.
If either the inner conductor or the outer shield
are open circuit, the word FAIL is displayed
along with digits 1 & 2 in blinking text.
button.
COAX
Page 11