ADE LW300T Series Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ваги ADE LW300T Series. ADE LW300T Series 20 сторінок. Electronic, price-computing retail scales
Друкувати сторінку
Battery status indicator
Display indication
Low battery indicator (only in battery mode). The indication of the function
is shown by an arrow (▼) in the display.
In order to protect the scale, it switches off automatically 30 minutes after
the battery symbol lights up if the charging voltage is too low. The battery
must be fully charged before operating the scale again.
Caution: The indicator symbol on the display shows the battery charge level when the scale is
not connected to the mains. When connecting the scale to the power supply, note the
LED display.
LED display
Green
Mains operation.
Battery is charging. To ensure that the battery is fully charged, keep the
scale connected to AC power for at least one hour.
Yellow
Battery is charging.
red
Battery almost discharged. Please charge immediately. Charging can take
up to twelve hours.
Caution: Please charge the battery fully before using it for the first time.
Preliminary Note
Do not load the scale with weights that exceed the maximum capacity. As soon as you perceive
the signal for an overload - this is shown by "--oL--" on the display - immediately remove the
load from the scale so as not to irreparably damage the load cell.
Switching the scale on and off
Switching on the scale
Remove all weights from the weighing surface.
To turn on the scale, press the on/off switch (on the right side below the housing).
The scale performs a test program. All symbols and characters are briefly displayed. End of
routine is confirmed with an acoustic signal and "0.00 / 0.000" is shown on all three displays.
The scale is now ready for use.
Upon relocation and especially in case of temperature changes, wait for a warm-up phase of 15
minutes after switching on the instrument to stabilize the measurement results.
Switching off the scale
To turn off the scale, press the on/off switch (on the right side below the housing).
Automatic deactivation of the scale
The scale is equipped with a power saving function. As a result, the scale switches off after a
period of time that can be set by the user (see section 9).
LW300_LW300T-200520-Rev005-UM-en
8. Using the scale
9