Aussie Traveller 380 mm Інструкція з монтажу Посібник з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Вентиляційна витяжка Aussie Traveller 380 mm. Aussie Traveller 380 mm 9 сторінок.

Друкувати сторінку

Rangehoods Installation Instructions

Thank you for purchasing an Aussie Traveller Rangehood

The Aussie Traveller Rangehood has been speciﬁcally designed for use in

a full range of RV installations including Caravans, Motorhomes, Cabins

and Boats where 12Volt power is used. Mounting and installation of the

Rangehood should be performed as per the following instruction and

installation manual.

Maintenance is required for all Aussie Traveller Rangehoods. Ensure the

vents are cleaned regularly by unclipping the vent from the body, rinsing

under hot water or cleaning in a dishwasher. Ensure the rear/top vent is

clean and clear of any debris. Ensure there are no obstructions in or

around the fan. Periodically check that the Rangehood remains secure

and has not moved or become loose during use or from travel.

Warranty. Your Aussie Traveller is covered by a 12 month product

warranty. Please read the warranty statement that is included with this

product.

Compliance. Installation of this unit in a Recreational Vehicle requires a

minimum distance between the underside of the rangehood and

cooktop heating surfaces (ie gas ﬂame aperture, electric element) of a

minimum 450mm. Ensure all relevant installation regulations are

adhered to. Changes may be applicable as compliance and regulations

with various industries are amended.

Aussie Traveller Pack List – 530mm & 380mm

1. Rangehood

2. Air outlet

3. Wind deﬂector

4. ST3.9× 13 cross self-tapping nail with pan head

5. ST2.9× 13 countersunk head cross tapping nails

6. ST4.2× 13 cross self-tapping nail with pan head

1pcs

4pcs

2pcs

4pcs