Austro Flamm Dexter 2.0 L Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Піч Austro Flamm Dexter 2.0 L. Austro Flamm Dexter 2.0 L 11 сторінок.

Друкувати сторінку

Dexter

5. SPECIAL FEATURES Dexter 2.0

Operation with external air supply

The German institute for constructional engineering (DIBT) has given the Dexter 2.0 the general technical approval for

operation with external air supply. If the combustion air is being supplied directly to the furnace by an air-tight pipe including

closing mechanism from the outside, then the stove may be used in residential property with mechanical ventilation.

If the stove in being used like that, a multiple stove installation on the same chimney is forbidden.

This stove has been approved by the German DIBT.

problem

door glass gets sooty too fast

stove does not get enough

combustion air

stove smells strongly and

there is smoke on the outside

surface

exhaust gas emission while

putting more wood on the fire

and during operation

possible reason

bad chimney draught

incorrect use of the combustion air

supply lever

wood logs are too large

operating temperature was not

reached

chimney draught not sufficient

stove is sooted inside

baking phase of the varnish

stove is dusty/dirty

chimney draught no sufficient, flue

pipe connection leaky

the stove door was opened before

the wood has burnt down to embers

solution

generally: door glasses must be cleaned with

Austroflamm glass cleaner from time to time

(depending on the frequency of use)

contact your chimney sweep (elongate

chimney/draught metering)

please operate air lever according to user's

instructions (if secondary air is closed, the door

glass soots rather fast)

keep to the max. fuel quantity according to user's

instruction

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

contact your chimney sweep (elongate

chimney/draught metering)

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

there may be some odour development during the

first operations

cleaning before the heating season starts!

inspect joints and seal up again if necessary

check chimney draught, examine operating - for info

video follow:

http://www.austroflamm.com/de/Video/index.html

put more fuel wood into the combustion chamber

only if there are only embers left (no more visible

flame)

english