Gadhouse HENRY Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Вертушка Gadhouse HENRY. Gadhouse HENRY 13 сторінок.

Друкувати сторінку

PRODUCT DESCRIPTION

SPEAKERS

R+R-

L-L+

PHONO

LINE

USB-PC

DC IN 15V

11. 33 1/3 / 45 Speed Button

1. Lid Hinge

12. Indicator

2. Stepped Drive Pulley

13. Volume Control

3. Drive Belt

14. Tonearm Clip

4. Turntable Spindle

15. Tonearm Lift Lever

5. Turntable Hub

16. Tonearm Lift

6. Turntable Platter

17. Anti-skating weight

7. Dust Cover

18. Tonearm Counterweight

8. Cartridge

19. Ground Connector

9. Function Switch Button

20. R Jack for RCA Line out

10. PLAY / STOP Button

MODE

PLAY

OFF

21. L Jack for RCA Line out

22. Phono / Line Out Switch

23. USB Port

24. Power Jack

25. Power Ampliﬁer R+

26. Power Ampliﬁer R-

27. Power Ampliﬁer L+

28. Power Ampliﬁer L-

29. Power Switch

30. Speaker Jack -

31. Speaker Jack +

GETTING STARTED

INITIAL SETUP

1. Place the unit on a ﬂat and level surface. The selected location should

be stable and free from vibration.

2. Install the turntable lid to the hinges.

3. Remove the tie-wrap that is holding the tonearm.

4. Put the drive belt around the Turntable Hub, and then use the provided

belt hoot to help pull the belt to ﬁt around the slot of motor pulley.

5. Place the turntable platter through the turntable spindle.

6. Place the slip mat on top of the turntable platter.

7. Slide Tonearm Counterweight onto tonearm and twist it lightly onto the

rear shaft of the tonearm.

8. Adjust the counterweight to set proper stylus pressure.

9. Connect the adaptor to the Power Jack of the unit.

NOTE: Do not plug the AC power adaptor to power outlet before all the

assembly is completed. Before turning the power on, make sure again all

the connection setting are correct. Always turn off the power when

connecting or disconnecting.

CARTRIDGE DOWN FORCE ADJUSTMENT

The Counterweight supplied is suitable for cartridges weighing between

3.0-6.0g. Gently push and turn the Counterweight onto the rear of the

tonearm (with the scale facing toward the front of the turntable).

Remove the cartridge protection cap. Lower the tonearm lift and position

the cartridge in the space between tonearm rest and platter.Carefully

rotate the Counterweight until the tonearm balances out. The tonearm

should return to the balanced position if it is moved up or down.

This adjustment must be done carefully.

Counterweight

Downforce scale ring

Center line