Great Circle LCE01 Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Знищувач паперу Great Circle LCE01. Great Circle LCE01 18 сторінок. Chipper shredder
Друкувати сторінку
ASSEMBLY
Install Stand (See Figure 1)
1. Position the stand (A) underneath the engine base
2. Using the four M8x60 bolts (C) and four nuts (D) to
tight the stand with the engine base plate
Install Chipper Cone (See Figure 3)
1. Position the chipper cone(B) over the three M8
thread studs protruding from the engine plate
2. Attach the three M8 flange nuts (C) and tighten to
secure the cone
3. Rubber cone cover (A) can be used when using the
vacuum function
Figure 1
Figure 3
Install the Wheels (See Figure 2)
1. Put the wheel onto the axle(B), Make sure the wheel
disc flat side face to machine.
2. Slide the washer (A) onto the axle against the wheel.
3. Insert the cotter pin (C) into the hole to secure the
wheel on the axle.
Install the Handle (See Figure 4)
1. Position the handle(A) to by aligning the handle holes
with the hopper holes on two sides
2. Using four flange bolts (C) and nuts (D) to secure the
handle on the hopper
Figure 2
Figure 4
5