Gaggenau VG 232 CA Інструкція з експлуатації та монтажу - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Варильна поверхня Gaggenau VG 232 CA. Gaggenau VG 232 CA 20 сторінок. Gas cooker vg 232 ca operating and assembly instructions
Також для Gaggenau VG 232 CA: Інструкція з експлуатації та монтажу (14 сторінок)
Друкувати сторінку
2.3 Operating principle
Fig. 4
8
The appliance features one-hand operation. That
is to say, the ignition is activated when the control
knob is pressed briefly.
After igniting, keep the control knob pressed for
around 5-8 seconds more because the heat sensor
that opens the gas channel has to warm up first.
The gas hob has 2 normal burners and 2 high-
intensity burners.
All burners have a thermal protection device that
prevents unburned gas from escaping in the open
position.
Off
The total rated thermal load amounts to:
32 000 BTU (9.4 kW) referred to H s * (gross calorific
28 600 BTU (8.4 kW) referred to H i (calorific value)
The specified rated load is defined by installation
of the fixed nozzles.
The gas hob is converted to a different gas
type by nozzle replacement (full and low-burning
nozzles) (see nozzle table on page 12).
The symbols on the control panel mean:
0 Off
High setting
Low
Low setting
The flame is infinitely variable between high and
low-setting.
Maintenance Instructions
– Keep appliance area clean and free from
combustible materials, gasoline and other
inflammable vapors and liquids.
– Do not obstruct the flow of combustion and
ventilation air.
High
– Visually check burner flames with this pictorial
representation (see figure 4).
value)