ADEMCO TI110B1 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки ADEMCO TI110B1. ADEMCO TI110B1 18 сторінок. Gsm/pstn dual network burglar alarm system

Друкувати сторінку

(2) Method 2:

Use the program cell phone to edit "Original Password*New Password*

XXXXX...X" and send it to GSM SIM card. And the new password will replace the original one.

And the GSM SIM card will send the new program password to the telephone number

"XXXXX...X".

For example: you use program cell phone to edit "888888*012345*13912345678", and send it to

GSM SIM card. And the cell phone "13912345678" will receive the new password "012345",

which means the new password has been set successfully.

(Note: the program password should be 6-digit; XXXXX...X-----the alarm receiving number)

3. Store Common Alarm Receiving Number (6 telephone numbers available)

Note: the program password of all the following operation demonstrations is original

password (888888). Also, you should use your new program password to do the

following operation after you get the new one.

Operation steps:

(1) Cell Phone: Use the program cell phone to edit "888888*7

GSM SIM card. And the

the alarm call and the alarm SMS. Similarly, you can use this way to store other numbers.

For example: you use program cell phone to edit "8888*71*13912345678" to GSM SIM card.

And the program cell phone will receive "1-13912345678". Besides, the telephone

"13912345678" will get such a message "You are welcome", which the 1

has been stored successfully.

(2) Fixed Phone: Use the program cell phone to edit "888888*7

the GSM SIM card. And the

alarm call but it cannot receive the alarm SMS. Similarly, you can use this way to store other

numbers. Similarly, you can use this way to store other numbers. (Note: "/"------the mark of

fixed telephone number and no alarm SMS available )

For example: you use program cell phone to edit "8888*71*22392288/" to GSM SIM card.

And the program cell phone will receive "1-22392288/", which the 1

been stored successfully. But this telephone cell will not get any alarm SMS when alarming.

4. Set Alarm Center Number

Note: if this GSM alarm system doesn't network with alarm center, you don't need to set this

function

(1) Store alarm center number: Use the program cell phone to edit "888888*7

X*YYYY" and send it to the GSM SIM card. And the center number is stored into the 1

number. ("XXXXX...X"-----center number;"YYYY"-----User's ID). Similarly, you can use this

way to store center number into any other 5 group)

you use program cell phone to edit "8888*71*22392288*0001" to GSM SIM

For example:

card. And the program cell phone will receive "1-22392288*0001/". It means that the center

number is stored into the 1

(3) Activate arming/disarming report to alarm center: Use the program cell phone to edit

"888888*7N*XXXXX ... X*YYYY" and send it to the GSM SIM card, and then

arming/disarming report to alarm center is set successfully. (N=7------Arming Report;

N=8------Disarming Report)

you use program cell phone to edit "8888*77*22392288*0001" to GSM SIM

For example 1:

number is stored successfully. Besides, the

number is stored successfully. The

group of number.

*XXXXX...X" and send it to the

number can receive

group of number

*XXXXX...X/" and send it to

number can receive the

group of number has

*XXXXX...

group of