Step-by-Step
Setting the System Clock
The next step in the process is to set the system clock. To do so enter installer code + [#] + [6] [3] while in normal
operating mode.
•
ALL partitions must be disarmed before you can set the system clock.
DISARMED
READY TO ARM
TIME/DATE
12:00AM
01 / 01 / 00
TIME/DATE
03:16P
2009/02/10
Testing the Auto Arming Window
To test the Auto Arming Schedule set the system clock 2 minute before the panel is suppose to auto arm and let it
roll into the window. Our panel is going to arm at 6PM so we will set our clock to 5:58PM. You can not program
the time for 6PM or greater and expect it to arm. As stated above the panel must roll into the time window.
What will prevent Auto Arming of the panel?
Panel Status
RF Supervision Error
Transmitter Tamper
Expander Supervision
Expander Tamper
Fire Alarm
Fire Alarm Memory
Fire Trouble
Burglar Alarm
Alarm Memory
What to look for if an Auto Arm fails
The table above explains when the panel prevents an auto arm; the only situations the panel will not arm is because
of any Alarm or Alarm memory. If you were trying to arm the panel from the keypad (not auto arming) it would
require you to disarm the system 2 times. Auto Arming is no different. The 1
(acknowledgement) and the 2
The Work Around
We must create 2 time windows to disarm before the actual auto arming of the panel. If we need the panel to auto
arm at 6PM, then we will create 2 more schedules. 1
again at 5:59PM, so to sum it up we would need 3 schedules:
2. Auto Disarm (Event #06) at 5:58 PM Sat-Sun, Weekly
3. Auto Disarm (Event #06) at 5:59 PM Sat-Sun, Weekly
4. Auto Arm (Event #05) at 6:00 PM Sat-Sun, Weekly
At the Disarmed Ready to Arm Screen Enter Installer code # 63
TUE
Current Time Display
Press [*] to Enter. When doing so you will see a flashing curser under the hour's slot.
TUE
Time/Date Editing display
Entries:
• Enter 2 digit hours
• Enter 2 digit minute
• Enter 1 for PM and 2 for AM
• Enter 2 last 2 digits for the year
• Enter 2 digit Month
• Enter 2 digit Day
Enter [*] to exit or wait 30 seconds.
Yes No
nd
time to clear the Trouble or Alarm condition.
st
schedule to disarm at 5:58PM and the 2
Silences/Acknowledges the Alarm/Trouble.
Resets the Alarm/Trouble Memory.
Arms the panel.
- 2 -
st
time is for the silence
nd
schedule to disarm
Tech Support
Updated 2/11/09
Друкувати сторінку