ADEMCO TeleCommand Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління ADEMCO TeleCommand. ADEMCO TeleCommand 20 сторінок. Telephone module

TeleCommand permits you to control your security system using a

Multiple Frequency telephone (either on premises or by a call-in when

away). With TeleCommand, you can do the following:

•

Receive synthesized voice reports about your security system

status over the telephone.

•

Arm and disarm the security system and perform most local

keypad functions using the telephone keypad. Voice confirmations

are provided for most function commands entered.

•

Turn certain lights/appliances on and off via the telephone

(Trigger Function).

The telephone used for telephone access must have multi-frequency

capability.

An off-premises telephone that does not have multi-frequency service

and uses decadic pulses for dialing may not permit switching to multi-

frequency after dialing. This type of telephone cannot be used.

Your installer has assigned a special 4-digit TeleCommand User Code

to access TeleCommand. TeleCommand access enables you to obtain

current security system status and the ability to command security

system command functions using the telephone keypad.

Introduction