Hieha CP7-9 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільний приймач Hieha CP7-9. Hieha CP7-9 18 сторінок. Upgraded 7”standard car stereo
Step2
Test rear view camera: Holding the
connected with the top red wire of the rear view camera,
the bottom red wire of the rear view camera combine together and then connected to
①
the
(which the red and yellow wires connected to the positive pole of the battery).
⑥The black wire of rear view camera is connected to②(which the black wire is connected
to the negative pole of the battery). At this time , if the camera lights up, and the car
stereo shows the reverse image, it means rear view camera is proper functioning.
④
⑤
⑥
connection. ④and then the pink wire is
Step 1
⑤
The middle red wire and
①
②
①
④
- 08 -
Pay attension
Unlike the period of test before installation, do not misunderstand
the red wire(ACC) and yellow wire(B+). If the yellow wire and red
wire are swapped, the head unit settings will not be saved.
Please refer to common problems No.4 on page 31.(No memory)
1.For legal issues and your safety, the system will automatically disconnect with the
mobile phone, such as calls & music in Bluetooth mode, phone mirror link, etc when
using the rear view reversing function.
Besides, if you do not intend to use the rear-view reversing function, please keep
④
disconnecting the part
to avoid disturbing the normal use of the car stereo.
2.If you're not satisfied with the effect with the installation or size, you can contact the
seller
within a month
since your order have been placed via
Feel free to ask the seller for help when you meet with other questions.
Connect together and connected
to the positive pole of the battery
the order page
- 09 -
for a return.